Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Configuring RPM Receiver Servers

The RPM TCP and UDP probes are proprietary to Juniper Networks and require a receiver to receive the probes. To configure a server to receive the probes, include the probe-server statement at the [edit services rpm] hierarchy level for Junos OS or the [edit services monitoring rpm] hierarchy level for Junos OS Evolved:

The port number specified for the UDP and TCP server can be 7 or from 49160 through 65535.

Note:

The destination-interface statement is not supported on PTX Series Packet Transport routers, or for devices running Junos OS Evolved.

When you configure either probe-type udp-ping or probe-type udp-ping-timestamp along with the one-way-hardware-timestamp command, the value for the destination-port can be only 7. A constraint check prevents you for configuring any other value for the destination port in this case.