vci
Syntax
vci vpi-identifier.vci-identifier;
Hierarchy Level
[edit interfaces at-fpc/pic/port unit logical-unit-number], [edit interfaces at-fpc/pic/port unit logical-unit-number family family address address multipoint-destination address], [edit logical-systems logical-system-name interfaces at-fpc/pic/port unit logical-unit-number], [edit logical-systems logical-system-name interfaces at-fpc/pic/port unit logical-unit-number family family address address multipoint-destination address]
Description
For ATM point-to-point logical interfaces only, configure the virtual circuit identifier (VCI) and virtual path identifier (VPI).
To configure a VPI for a point-to-multipoint interface, specify the VPI in the multipoint-destination statement.
VCIs 0 through 31 are reserved for specific ATM values designated by the ATM Forum.
Options
vci-identifier—ATM virtual circuit identifier. Unless you configure the interface
to use promiscuous mode, this value cannot exceed the highest-numbered
VC configured for the interface with the maximum-vcs option
of the vpi statement.
Range: 0 through 4089 or 0 through 65,535 with promiscuous mode, with VCIs 0 through 31 reserved.
vpi-identifier—ATM virtual
path identifier.
Range: 0 through 255
Default: 0
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.