show snmp health-monitor
Sintaxis
show snmp health-monitor <alarms <detail>> | <logs>
Descripción
Muestra información sobre registros y alarmas de monitoreo de estado del Protocolo simple de administración de red (SNMP).
Opciones
| none | Muestra información de todos los registros y alarmas de monitoreo de estado. |
| alarms <detail> | (Opcional) Muestra información detallada sobre las alarmas de monitoreo de estado. |
| logs | (Opcional) Muestra información de los registros de monitoreo de estado. |
Nivel de privilegio requerido
Vista
Campos de salida
Tabla 1 describe los campos de salida del show snmp health-monitor comando. Los campos de salida se enumeran en el orden aproximado en el que aparecen.
Nombre de campo |
Descripción de campo |
Nivel de salida |
|---|---|---|
Alarm Index |
Identificador de alarma. |
Todos los niveles |
Variable description |
Descripción de la instancia de objeto de monitoreo de estado que se supervisa. |
Todos los niveles |
Variable name |
Nombre de la instancia de objeto de monitoreo de estado que se supervisa. |
Todos los niveles |
Value |
Valor actual de la variable supervisada en el intervalo de muestra más reciente. |
Todos los niveles |
State |
Estado de alarma o entrada de evento:
|
Todos los niveles |
Variable OID |
ID de objeto en el que se resuelve el nombre de la variable. El formato es x.x.x.x. |
detail |
Sample type |
Método de toma de muestras de la variable monitoreada y cálculo del valor para comparar con los umbrales superior e inferior. Puede tener el valor de absolute value o delta value. |
detail |
Startup alarm |
Alarma que se puede enviar cuando se activa por primera vez esta entrada, según los siguientes criterios:
|
detail |
Owner |
Nombre de la entrada configurada por el usuario. Si la entrada se creó a través de la CLI, el propietario se antepone monitor a ella. |
detail |
Creator |
Mecanismo mediante el cual se configuró la entrada (Health Monitor). |
detail |
Sample interval |
Tiempo entre muestras (en segundos). |
detail |
Rising threshold |
Valor de umbral de límite superior como porcentaje del valor máximo posible. |
detail |
Falling threshold |
Valor de umbral de límite inferior como porcentaje del valor máximo posible. |
detail |
Rising event index |
Evento que se activa cuando se cruza el umbral ascendente. |
detail |
Falling event index |
Evento que se activa cuando se cruza el umbral descendente. |
detail |
Salida de muestra
mostrar monitoreo de estado SNMP
user@host> show snmp health-monitor
Alarm
Index Variable description Value State
32768 Health Monitor: root file system utilization
jnxHrStoragePercentUsed.1 58 active
32769 Health Monitor: /config file system utilization
jnxHrStoragePercentUsed.2 0 active
32770 Health Monitor: RE 0 CPU utilization
jnxOperatingCPU.9.1.0.0 0 active
32773 Health Monitor: RE 0 Memory utilization
jnxOperatingBuffer.9.1.0.0 35 active
32775 Health Monitor: jkernel daemon CPU utilization
Init daemon 0 active
Chassis daemon 50 active
Firewall daemon 0 active
Interface daemon 5 active
SNMP daemon 11 active
MIB2 daemon 42 active
Sonet APS daemon 0 active
VRRP daemon 0 active
Alarm daemon 3 active
PFE daemon 0 active
CRAFT daemon 0 active
Traffic sampling control daemon 0 active
Ilmi daemon 0 active
Remote operations daemon 0 active
CoS daemon 0 active
Pic Services Logging daemon 0 active
Internal Routing Service Daemon 3 active
Network Access Service daemon 0 active
Forwarding UDP daemon 0 active
Routing socket proxy daemon 0 active
Disk Monitoring daemon 1 active
Inet daemon 0 active
Syslog daemon 0 active
Adaptive Services PIC daemon 0 active
ECC parity errors logging Daemon 0 active
Layer 2 Tunneling Protocol daemon 0 active
PPPoE daemon 3 active
Redundancy device daemon 0 active
PPP daemon 0 active
Dynamic Flow Capture Daemon 0 active
32776 Health Monitor: jroute daemon CPU utilization
Routing protocol daemon 1 active
Management daemon 0 active
Management daemon 0 active
Command line interface 4 active
Periodic Packet Management daemon 0 active
Link Management daemon 0 active
Pragmatic General Multicast daemon 0 active
Bidirectional Forwarding Detection daemon 0 active
SRC daemon 0 active
audit daemon 0 active
Event daemon 0 active
32777 Health Monitor: jcrypto daemon CPU utilization
IPSec Key Management daemon 0 active
32779 Health Monitor: jkernel daemon Memory utilization
Init daemon 47384 active
Chassis daemon 20204 active
Firewall daemon 1956 active
Interface daemon 3340 active
SNMP daemon 4540 active
MIB2 daemon 3880 active
Sonet APS daemon 2632 active
VRRP daemon 2672 active
Alarm daemon 1856 active
PFE daemon 2600 active
CRAFT daemon 2000 active
Traffic sampling control daemon 3164 active
Ilmi daemon 2132 active
Remote operations daemon 2964 active
CoS daemon 3044 active
Pic Services Logging daemon 1944 active
Internal Routing Service Daemon 1392 active
Network Access Service daemon 1992 active
Forwarding UDP daemon 1876 active
Routing socket proxy daemon 1296 active
Disk Monitoring daemon 1180 active
Inet daemon 1296 active
Syslog daemon 1180 active
Adaptive Services PIC daemon 3220 active
ECC parity errors logging Daemon 1100 active
Layer 2 Tunneling Protocol daemon 3372 active
PPPoE daemon 1424 active
Redundancy device daemon 1820 active
PPP daemon 2060 active
Dynamic Flow Capture Daemon 10740 active
32780 Health Monitor: jroute daemon Memory utilization
Routing protocol daemon 8104 active
Management daemon 13360 active
Management daemon 19252 active
Command line interface 9912 active
Periodic Packet Management daemon 1484 active
Link Management daemon 2016 active
Pragmatic General Multicast daemon 1968 active
Bidirectional Forwarding Detection daemon 1956 active
SRC daemon 1772 active
audit daemon 1772 active
Event daemon 1808 active
32781 Health Monitor: jcrypto daemon Memory utilization
IPSec Key Management daemon 5600 active
muestra detalles de las alarmas de monitoreo de estado SNMP
user@host> show snmp health-monitor alarms detail
Alarm Index 32768:
Variable name jnxHrStoragePercentUsed.1
Variable OID 1.3.6.1.4.1.2636.3.31.1.1.1.1.1
Sample type absolute value
Startup alarm rising alarm
Owner Health Monitor: root file system
utilization
Creator Health Monitor
State active
Sample interval 300 seconds
Rising threshold 80
Falling threshold 70
Rising event index 32768
Falling event index 32768
Instance Value: 58
Instance State: active
Alarm Index 32769:
Variable name jnxHrStoragePercentUsed.2
Variable OID 1.3.6.1.4.1.2636.3.31.1.1.1.1.2
Sample type absolute value
Startup alarm rising alarm
Owner Health Monitor: /config file system
utilization
Creator Health Monitor
State active
Sample interval 300 seconds
Rising threshold 80
Falling threshold 70
Rising event index 32768
Falling event index 32768
Instance Value: 0
Instance State: active
Alarm Index 32770:
Variable name jnxOperatingCPU.9.1.0.0
Variable OID 1.3.6.1.4.1.2636.3.1.13.1.8.9.1.0.0
Sample type absolute value
Startup alarm rising alarm
Owner Health Monitor: RE 0 CPU utilization
Creator Health Monitor
State active
Sample interval 300 seconds
Rising threshold 80
Falling threshold 70
Rising event index 32768
Falling event index 32768
Instance Value: 0
Instance State: active
Alarm Index 32773:
Variable name jnxOperatingBuffer.9.1.0.0
Variable OID 1.3.6.1.4.1.2636.3.1.13.1.11.9.1.0.0
Sample type absolute value
Startup alarm rising alarm
Owner Health Monitor: RE 0 Memory utilization
Creator Health Monitor
State active
Sample interval 300 seconds
Rising threshold 80
Falling threshold 70
Rising event index 32768
Falling event index 32768
Instance Value: 35
Instance State: active
Alarm Index 32775:
Variable name sysApplElmtRunCPU.3
Variable OID 1.3.6.1.2.1.54.1.2.3.1.9.3
Sample type delta value
Startup alarm rising alarm
Owner Health Monitor: jkernel daemon CPU
utilization
Creator Health Monitor
State active
Sample interval 300 seconds
Rising threshold 24000
Falling threshold 21000
Rising event index 32768
Falling event index 32768
Instance Name: sysApplElmtRunCPU.3.1.1
Instance Description: Init daemon
Instance Value: 0
Instance State: active
Instance Name: sysApplElmtRunCPU.3.2.2786
Instance Description: Chassis daemon
Instance Value: 50
Instance State: active
Instance Name: sysApplElmtRunCPU.3.3.2938
Instance Description: Firewall daemon
Instance Value: 0
Instance State: active
Instance Name: sysApplElmtRunCPU.3.4.2942
Instance Description: Interface daemon
Instance Value: 5
Instance State: active
Instance Name: sysApplElmtRunCPU.3.7.7332
Instance Description: SNMP daemon
Instance Value: 11
Instance State: active
Instance Name: sysApplElmtRunCPU.3.9.2914
Instance Description: MIB2 daemon
Instance Value: 42
Instance State: active
Instance Name: sysApplElmtRunCPU.3.12.2916
Instance Description: Sonet APS daemon
Instance Value: 0
Instance State: active
Instance Name: sysApplElmtRunCPU.3.13.2917
Instance Description: VRRP daemon
Instance Value: 0
Instance State: active
Instance Name: sysApplElmtRunCPU.3.14.2787
Instance Description: Alarm daemon
Instance Value: 3
Instance State: active
Instance Name: sysApplElmtRunCPU.3.15.2940
Instance Description: PFE daemon
Instance Value: 0
Instance State: active
Instance Name: sysApplElmtRunCPU.3.16.2788
Instance Description: CRAFT daemon
Instance Value: 0
Instance State: active
Instance Name: sysApplElmtRunCPU.3.17.2918
Instance Description: Traffic sampling control daemon
---(more 23%)---
Información de versión
Comando introducido en Junos OS versión 8.0.