Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Paragon Insights 대화형 설치 프롬프트

명령을 실행하는 sudo healthbot setup 동안 설치 프로세스의 일부로 몇 가지 질문에 답하라는 메시지가 표시됩니다.

각 질문의 기본값은 대괄호 [ ]안에 표시됩니다. 선택 사항이 필요한 경우 기본 옵션은 대문자로 표시됩니다. 예를 들어, [Y/n].

Paragon Insights(이전의 HealthBot) 설치에 대한 자세한 내용은 대화형 설치 프로그램을 사용하여 Paragon Insights 릴리스 4.X 설치 또는 업그레이드를 참조하십시오.

Paragon Insights 릴리스 4.3.0에 대한 프롬프트

  • Paragon Insights free model/freemium license tier is not available in this version. A valid license (trial or commercial) is needed to use Paragon Insights features.

    The format of license key has been changed due to business reasons in this version. The system may have contained the older format of license keys, which are not valid now. You can log into the Juniper Agile Licensing Portal and choose to revoke the existing license and then re-activate the license to a new software version (that will provide you with a new format license key). This newly activated license can be added to the system post upgrade.

    Do you want to proceed? [Y/n]

  • Do you want system to create and use a self-signed SSL certificate? [Y/n]

  • Enter hostnames/ip address of the kubernetes master node(s):

  • Enter comma separated hostnames/ip addresses of kubernetes worker nodes.

  • Do you want HealthBot services to run on master node? [Y/n]

    All nodes must be in the same subnet. Abort the setup if all the nodes are not within same subnet.

  • Please enter password for user ”root” to connect to the nodes:

    암호를 확인하라는 메시지가 표시됩니다.

    Confirm password:

  • Enter comma separated virtual IP(s):

    참고:

    Paragon Insights 서비스에 연결하려면 가상 IP 주소가 필요합니다. 여러 인터페이스가 서로 다른 네트워크에 연결되어 있는 경우 연결이 필요한 각 네트워크에서 가상 IP 주소를 지정합니다.

Paragon Insights 릴리스 4.2.0에 대한 프롬프트

  • Paragon Insights free model/freemium license tier is not available in this version. A valid license (trial or commercial) is needed to use Paragon Insights features.

    Do you want to proceed? [Y/n]

  • Do you want system to create and use a self-signed SSL certificate? [Y/n]

  • Enter hostnames/ip address of the kubernetes master node(s):

  • Enter comma separated hostnames/ip addresses of kubernetes worker nodes.

  • Do you want HealthBot services to run on master node? [Y/n]

    All nodes must be in the same subnet. Abort the setup if all the nodes are not within same subnet.

  • Please enter password for user ”root” to connect to the nodes:

    암호를 확인하라는 메시지가 표시됩니다.

    Confirm password:

  • Enter comma separated virtual IP(s):

    참고:

    Paragon Insights 서비스에 연결하려면 가상 IP 주소가 필요합니다. 여러 인터페이스가 서로 다른 네트워크에 연결되어 있는 경우 연결해야 하는 각 네트워크에서 가상 IP 주소를 지정합니다.

Paragon Insights 릴리스 4.0.0 및 4.1.0에 대한 프롬프트

  • Do you want system to create and use a self-signed SSL certificate? [Y/n]

  • Do you want to install on kubernetes? [y/N]

    를 입력합니다 y.

  • Enter hostnames/ip address of the kubernetes master node(s):

  • Enter comma separated hostnames/ip addresses of kubernetes worker nodes.

  • Do you want HealthBot services to run on master node? [Y/n]

    All nodes must be in the same subnet. Abort the setup if all the nodes are not within same subnet.

  • Please enter password for user ”regress” to connect to the nodes:

    암호를 확인하라는 메시지가 표시됩니다.

    Confirm password:

  • Enter comma separated virtual IP(s):

    참고:

    Paragon Insights 서비스에 연결하려면 가상 IP 주소가 필요합니다. 여러 인터페이스가 서로 다른 네트워크에 연결되어 있는 경우 연결해야 하는 각 네트워크에서 가상 IP 주소를 지정합니다.

HealthBot 릴리스 3.2.0(Docker Compose 설치)에 대한 프롬프트

  • Do you want system to create and use a self-signed SSL certificate? [Y/n]

  • Do you want to install on kubernetes? [y/N]

    N 입력하여 Docker Compose 설치를 시작합니다.

  • Please enter host IP address. This must be the IP address for establishing SSH connection to the host:

  • (반복)Do you want system to create and use a self-signed SSL certificate? [Y/n]

  • Use IPv6 docker network? [y/N]

  • Enter subnet for IPv4 Docker network (optional):

HealthBot 릴리스 3.2.0(Kubernetes 기반 설치)에 대한 프롬프트

  • Do you want system to create and use a self-signed SSL certificate? [Y/n]

  • Do you want to install on kubernetes? [y/N]

    kubernetes 기반 설치를 시작하려면 을 입력합니다 y .

  • Do you have Kubernetes cluster already? [Y/n]

  • Enter hostnames/ip address of the kubernetes master node(s):

  • Enter comma separated hostnames/ip addresses of kubernetes worker nodes.

  • Do you want HealthBot services to run on master node? [Y/n]