probe
구문
probe owner {
test test-name {
data-fill data;
data-size size;
delegate-probes probes;
destination-interface interface-name;
destination-port port;
dscp-code-point dscp-bits;
history-size size;
inet6-options source-address ipv6-address;
moving-average-size number;
next-hop next-hop;
offload-type {
none;
pfe-timestamp;
}
probe-count count;
probe-interval seconds;
probe-type type;
routing-instance instance-name;
rpm-scale {
destination {
interface interface-name.logical-unit-number;
subunit-cnt subunit-cnt;
}
source {
address-base ipv4-address-base;
count ipv4-count;
step ipv4-step;
}
source-inet6 {
address-base ipv6-address-base;
count ipv6-count;
step ipv6-step;
}
target {
address-base ipv4-address-base;
count ipv4-count;
step ipv4-step;
}
target-inet6 {
address-base ipv6-address-base;
count ipv6-count;
step ipv6-step;
}
tests-count tests-count;
}
source-address address;
target (url url | address ipv4-address | inet6-url url | inet6-address ipv6-address);
test-interval interval;
thresholds
{
egress-time microseconds;
ingress-time microseconds;
jitter-egress microseconds;
jitter-ingress microseconds;
jitter-rtt microseconds;
rtt microseconds;
std-dev-egress microseconds;
std-dev-ingress microseconds;
std-dev-rtt microseconds;
successive-loss count;
total-loss count;
}
traps [trap-names];
ttl [hop-count];
}
}
계층 수준
[edit services rpm]
설명
소유자 이름을 지정합니다. 테스트 이름과 결합된 소유자 이름은 단일 RPM 구성 인스턴스를 나타냅니다.
필수 권한 수준
system - 구성에서 이 명령문을 볼 수 있습니다.
interface-control - 구성에 이 명령문을 추가합니다.
출시 정보
Junos OS 릴리스 7.4 전에 소개된 명령문입니다.