ethernet-switch-profile
구문
ethernet-switch-profile { ethernet-policer-profile { input-priority-map { ieee802.1p premium [values]; } output-priority-map { classifier { premium { forwarding-class class-name { loss-priority (high | low); } } } } policer cos-policer-name { aggregate { bandwidth-limit bps; burst-size-limit bytes; } premium { bandwidth-limit bps; burst-size-limit bytes; } } storm-control storm-control-profile; tag-protocol-id tpid; } mac-learn-enable; }
계층 수준
[edit interfaces interface-name gigether-options], [edit interfaces interface-name aggregated-ether-options], [edit interfaces interface-name aggregated-ether-options], [edit interfaces interface-name ether-options]
설명
QFX 시리즈 독립형 스위치에서 ethernet-policer-profile
CLI 계층 및 mac-learn-enable
문은 Enhanced Layer 2 스위칭 CLI에서만 지원됩니다.
기가비트 이더넷 IQ, 10기가비트 이더넷 IQ2 및 IQ2-E, SFP가 있는 기가비트 이더넷 PIC(10포트 기가비트 이더넷 PIC, 기가비트 이더넷 IQ 인터페이스가 있는 어그리게이션 이더넷, M7i 라우터의 내장 기가비트 이더넷 포트 제외) 100기가비트 이더넷 유형 5 PIC(CFP 포함), 및 기가비트 이더넷, 10기가비트 이더넷, 40기가비트 이더넷 및 EX 시리즈 스위치의 어그리게이션 이더넷 인터페이스를 구성하여 VLAN 태그를 구성하고 어카운팅 및 필터링 속성을 MAC 주소.
나머지 문은 별도로 설명됩니다. CLI 탐색기를 참조하십시오.
인터페이스를 브리지 도메인 no-mac-learn-enable
으로 모으면 계층 수준에서 명령문 [edit interfaces interface-name gigether-options ethernet-switch-profile]
이 지원되지 않습니다. 브리지 도메인의 no-mac-learning
인터페이스에서 MAC 학습을 [edit bridge-domains bridge-domain-name bridge-options interface interface-name]
비활성화하려면 계층 수준에서 문을 사용해야 합니다. 브리지 도메인에 대한 MAC 학습 비활성화에 대한 정보는 MX 시리즈 레이어 2 구성 가이드를 참조하십시오.
기본
ethernet-switch-profile
문이 구성되지 않은 경우, SFP가 있는 기가비트 이더넷 IQ 및 기가비트 이더넷 PIC(M7i 라우터의 10포트 기가비트 이더넷 PIC 및 빌트인 기가비트 이더넷 포트 제외)는 기가비트 이더넷 인터페이스처럼 작동합니다.
필수 권한 수준
interface - 구성에서 이 명령문을 볼 수 있습니다.
interface-control - 구성에 이 명령문을 추가합니다.
출시 정보
Junos OS 릴리스 7.4 전에 소개된 명령문입니다.
ACX 시리즈 유니버설 메트로 라우터를 위한 Junos OS 릴리스 12.2에서 소개된 명령문입니다.