지원되는 OTN 및 옵틱 옵션

이 주제를 사용하여 특정 디바이스에서 지원되는 옵틱 옵션 및 otn 옵션에 대한 정보를 확인하십시오.

PTX 시리즈 라우터에서 지원되는 OTN 옵션

표 1 은(는) 계층 수준에서 PTX 시리즈 라우터의 100기가비트 이더넷 PIC에서 [edit interfaces interface-name otn-options] 지원되는 문을 나열합니다. NA라는 용어는 해당 특정 구성 요소에 문이 적용되지 않음을 유의하십시오.

표 1: PTX 시리즈 라우터의 100기가비트 이더넷 PIC에서 지원되는 문
문을	옵션	P1-PTX-2-100G-WDM (PTX5000/ PTX3000)	P2-100GE-OTN (PTX5000)	P1-PTX-24-10G-W-SFPP (PTX5000)
`bytes (otn-options)`	`transmit-payload- type value`	13.2/13.3	14.1R2 14.2	14.2
`fec`	`(efec \| gfec \| gfec-sdfec \| none \| ufec)`	13.2/13.3	14.1R2 14.2 (`gfec`, `none`)	14.2
`insert- odu-lck`	-	13.2/13.3	14.1R2 14.2	14.2
`insert- odu-oci`	-	13.2/13.3	14.1R2 14.2	14.2
`is-ma \| no-is-ma`	-	13.2/13.3	NA	14.2
`laser-enable \| no-laser-enable`	-	13.2/13.3	14.1R2 14.2	14.2
`line-loopback \| no-line-loopback`	-	13.2/13.3	14.1R2 14.2	14.2
`local-loopback \| no-local-loopback`	-	13.2/13.3	14.1R2 14.2	14.2
`odu-delay- management`	`bypass \| no-bypass`	13.2/13.3	NA	NA
	`monitor- end-point \| no-monitor-end-point`	13.2/13.3	NA	NA
	`number- of-frames value`	13.2/13.3	NA	NA
	`no-start- measurement \| start- measurement`	13.2/13.3	NA	NA
`odu-signal- degrade`	`ber-threshold -clear value`	NA NA	14.1R2 14.2	NA
	`ber-threshold -signal-degrade value`	NA NA	14.1R2 14.2	NA
	`interval value`	NA	14.1R2 14.2	NA
`odu-ttim-action- enable \| no-odu-ttim-action- enable`	-	13.2/13.3	14.1R2 14.2	14.2
`otu-ttim-action- enable \| no-otu-ttim-action- enable`	-	13.2/13.3	14.1R2 14.2	14.2
`prbs \| no-prbs`	-	13.2/13.3	14.1R2 14.2	14.2
`preemptive-fast- reroute`	`backward-frr -enable \| no-backward-frr- enable`	13.2/13.3	14.1R2 14.2	14.2
	`signal- degrade- monitor- enable \| no-signal- degrade- monitor-enable`	13.2/13.3	14.1R2 14.2	14.2
	`odu-backward- frr-enable \| no-odu-backward- frr-enable`	NA	14.1R2 14.2	NA
	`odu-signal-degrade- monitor-enable \| no-odu-signal-degrade- monitor-enable`	NA	14.1R2 14.2	NA
`rate`	`fixed-stuff-bytes \| no-fixed-stuff-bytes`	13.2/13.3	NA	14.2
	`oc192`	13.2/13.3	NA	14.2
	`otu4`	13.2/13.3	14.1R2 14.2	NA
	`pass-through \| no-pass-through`	13.2/13.3	NA	NA
`signal-degrade`	`ber-threshold-clear value`	13.2/13.3	14.1R2 14.2	14.2
	`ber-threshold-signal-degrade value`	13.2/13.3	14.1R2 14.2	14.2
	`interval value`	13.2/13.3	14.1R2 14.2	14.2
`tca`	`odu-tca-bbe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	14.2	14.2
	`odu-tca-bbe-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	NA	14.2
	`odu-tca-es (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	14.2	14.2
	`odu-tca-es-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	NA	14.2
	`odu-tca-ses (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	14.2	14.2
	`odu-tca-ses-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	NA	14.2
	`odu-tca-uas (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	14.2	14.2
	`otu-tca-bbe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	14.2	14.2
	`otu-tca-bbe-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	NA	14.2
	`otu-tca-es (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	14.2	14.2
	`otu-tca-es-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	NA	14.2
	`otu-tca-fec-ber (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	14.2	14.2
	`otu-tca-ses (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	14.2	14.2
	`otu-tca-ses-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	NA	14.2
	`otu-tca-uas (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	14.2	14.2
	`otu-tca-uas-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.2/13.3	NA	14.2
전송 모니터링	-	NA	NA	14.2
`trigger trigger-identifier`	`oc-lof (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`oc-lom (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`oc-los (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`oc-tsf (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`oc-wavelength-lock (hold-time (down \| up) \| ignore)`	13.2/13.3	NA	14.2
	`odu-ais (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`odu-bdi (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`odu-bei (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`odu-iae (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`odu-lck (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`odu-oci (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`odu-sd (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`odu-ttim`	13.2/13.3	14.1R2 14.2	14.2
	`opu-ptim (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`otu-ais (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`otu-bdi (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`otu-fec-deg (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`otu-fec-exe (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`otu-iae (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`otu-sd (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
	`otu-ttim (hold-time (down \| up) \| ignore)`	13.2/13.3	14.1R2 14.2	14.2
`tti tti-identifier`	`odu-dapi identifier`	13.2/13.3	14.1R2 14.2	14.2
	`odu-expected- receive-dapi identifier`	13.2/13.3	14.1R2 14.2	14.2
	`odu-expected- receive-sapi identifier`	13.2/13.3	14.1R2 14.2	14.2
	`odu-sapi identifier`	13.2/13.3	14.1R2 14.2	14.2
	`otu-dapi identifier`	13.2/13.3	14.1R2 14.2	14.2
	`otu-expected- receive-dapi identifier`	13.2/13.3	14.1R2 14.2	14.2
	`otu-expected- receive-sapi identifier`	13.2/13.3	14.1R2 14.2	14.2
	`otu-sapi identifier`	13.2/13.3	14.1R2 14.2	14.2

MX 시리즈 라우터에서 지원되는 OTN 옵션

표 2 은(는) 계층 수준에서 MX 시리즈 라우터의 100기가비트 이더넷 MIC에서 [edit interfaces interface-name otn-options] 지원되는 문을 나열합니다. NA라는 용어는 해당 특정 구성 요소에 문이 적용되지 않음을 유의하십시오.

표 2: MX 시리즈 라우터의 100기가비트 이더넷 MIC에서 지원되는 문
문을	옵션	MIC6-100G-CFP2(MX2010 / MX2020)	MIC3-100G-DWDM (MX240, MX480, MX960, MX2010 및 MX2020)
`bytes`	`transmit-payload-type value`	NA	15.1F5
`fec`	`(efec \| gfec \| gfec-sdfec \| hgfec\| none \| dsfec\| ufec)`	13.3R3 (`ufec`)	15.1F5 (`gfec`,`hgfec`,`sdfec`)
`insert- odu-lck`	-	13.3R3	15.1F5
`insert- odu-oci`	-	13.3R3	15.1F5
`is-ma \| no-is-ma`	-	13.3R3	15.1F5
`laser-enable \| no-laser-enable`	-	13.3R3	15.1F5
`line-loopback \| no-line-loopback`	-	13.3R3	15.1F5
`local-loopback \| no-local-loopback`	-	13.3R3	15.1F5
`odu-delay- management`	`bypass \| no-bypass`	NA	15.1F5
	`monitor- end-point \| no-monitor-end-point`	NA	15.1F5
	`number- of-frames value`	NA	15.1F5
	`no-start- measurement \| start- measurement`	NA	15.1F5
`signal-degrade`	`ber-threshold -clear value`	13.3R3	15.1F5
	`ber-threshold -signal-degrade value`	13.3R3	15.1F5
	`interval value`	13.3R3	15.1F5
`odu-ttim-action- enable \| no-odu-ttim-action- enable`	-	13.3R3	15.1F5
`otu-ttim-action- enable \| no-otu-ttim-action- enable`	-	13.3R3	15.1F5
`prbs \| no-prbs`	-	13.3R3	15.1F5
`preemptive-fast- reroute`	`backward-frr -enable \| no-backward-frr- enable`	13.3R3	15.1F5
	`signal- degrade- monitor- enable \| no-signal- degrade- monitor-enable`	13.3R3	15.1F5
	`odu-backward-frr-enable \| no-odu-backward-frr-enable`	NA	15.1F5
	`odu-signal-degrade- monitor-enable \| no-odu-signal-degrade- monitor-enable`	NA	15.1F5
`rate`	`fixed-stuff-bytes \| no-fixed-stuff-bytes`	13.3R3	15.1F5
	`oc192`	13.3R3	15.1F5
	`otu4`	13.3R3	15.1F5
	`pass-through`	13.3R3 (`pass-through`)	15.1F5 (`pass-through`)
`signal-degrade`	`ber-threshold-clear value`	13.3R3	15.1F5
	`ber-threshold-signal-degrade value`	13.3R3	15.1F5
	`interval value`	13.3R3	15.1F5
	`q-threshold-signal-degrade`	NA	15.1F5
	`q-threshold-signal-degrade-clear`	NA	15.1F5
`tca`	`odu-tca-bbe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
	`odu-tca-bbe-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
	`odu-tca-es (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
	`odu-tca-es-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
	`odu-tca-ses (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
	`odu-tca-ses-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
	`odu-tca-uas (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
	`otu-tca-bbe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
	`otu-tca-bbe-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
	`otu-tca-es (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
	`otu-tca-es-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
	`otu-tca-fec-ber (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
	`otu-tca-ses (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
	`otu-tca-ses-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
	`otu-tca-uas (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
	`otu-tca-uas-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	13.3R3	15.1F5
전송 모니터링	-	NA	15.1F5
`trigger trigger-identifier`	`oc-lof (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
	`oc-lom (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
	`oc-los (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
	`oc-tsf (hold-time (down \| up) \| ignore)`	NA	15.1F5
	`oc-wavelength-lock (hold-time (down \| up) \| ignore)`	NA	15.1F5
	`odu-ais (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
	`odu-bdi (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
	`odu-bei (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
	`odu-iae (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
	`odu-lck (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
	`odu-oci (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
	`odu-sd (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
	`odu-tca-es`	13.3R3	NA
	`odu-tca-ses`	13.3R3	NA
	`odu-tca-uas`	13.3R3	NA
	`odu-ttim`	13.3R3	15.1F5
	`opu-ptim (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
	`otu-ais (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
	`otu-bdi (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
	`otu-fec-deg (hold-time (down \| up) \| ignore)`	NA	15.1F5
	`otu-fec-exe (hold-time (down \| up) \| ignore)`	NA	15.1F5
	`otu-iae (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
	`otu-sd (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
	`odu-tca-es`	13.3R3	NA
	`odu-tca-ses`	13.3R3	NA
	`odu-tca-uas`	13.3R3	NA
	`otu-ttim (hold-time (down \| up) \| ignore)`	13.3R3	15.1F5
`tti tti-identifier`	`odu-dapi identifier`Y	13.3R3	15.1F5
	`odu-dapi-first-byte-nul \| no-odu-dapi-first-byte-nul`	NA	15.1F5
	`odu-expected-receive-dapiidentifier`	13.3R3	15.1F5
	`odu-expected-receive-dapi-first-byte-nul\| no-odu-expected-receive-dapi-first-byte-nul`	NA	15.1F5
	`odu-expected-receive-sapi identifier`	13.3R3	15.1F5
	`odu-sapi identifier`Y	13.3R3	15.1F5
	`odu-sapi-first-byte-nul \| no-odu-sapi-first-byte-nul`	NA	15.1F5
	`otu-dapi identifier`	13.3R3	15.1F5
	`otu-dapi-first-byte-nul \| no-otu-dapi-first-byte-nul`	NA	15.1F5
	`otu-expected- receive-dapi identifier`	13.3R3	15.1F5
	`otu-expected-receive-dapi-first-byte-nul\| no-odu-expected-receive-dapi-first-byte-nul`	NA	15.1F5
	`otu-expected- receive-sapi identifier`	13.3R3	15.1F5
	`otu-expected-receive-sapi-first-byte-nul\| no-odu-expected-receive-dapi-first-byte-nul`	NA	15.1F5
	`otu-sapi identifier`	13.3R3	15.1F5
	`otu-sapi-first-byte-nul`	NA	15.1F5

ACX6360 라우터에서 지원되는 OTN 옵션

표 3 은(는) 계층 수준에서 ACX6360 라우터에서 [edit interfaces interface-name otn-options] 지원되는 문을 나열합니다. NA라는 용어는 해당 특정 구성 요소에 문이 적용되지 않음을 유의하십시오.

표 3: ACX6360 라우터에서 지원되는 문
문을	옵션	Junos 버전
`bytes (otn-options)`	`transmit-payload- type value`	18.3R1
`insert- odu-lck`	-	18.3R1
`insert- odu-oci`	-	18.3R1
`is-ma \| no-is-ma`	-	18.3R1
`line-loopback \| no-line-loopback`	-	18.3R1
`local-loopback \| no-local-loopback`	-	18.3R1
`odu-ttim-action- enable \| no-odu-ttim-action- enable`	-	18.3R1
`otu-ttim-action- enable \| no-otu-ttim-action- enable`	-	18.3R1
`prbs \| no-prbs`	-	18.3R1
`preemptive-fast- reroute`	`backward-frr -enable \| no-backward-frr- enable`	18.3R1
	`signal- degrade- monitor- enable \| no-signal- degrade- monitor-enable`	18.3R1
	`odu-backward- frr-enable \| no-odu-backward- frr-enable`	NA
	`odu-signal-degrade- monitor-enable \| no-odu-signal-degrade- monitor-enable`	NA
`tca`	`odu-tca-bbe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-bbe-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-es (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-es-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-ses (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-ses-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-uas (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-bbe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-bbe-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-es (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-es-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-ses (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-ses-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-uas (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-uas-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
`trigger trigger-identifier`	`oc-lof (hold-time (down \| up) \| ignore)`	18.3R1
	`oc-lom (hold-time (down \| up) \| ignore)`	18.3R1
	`oc-tsf (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-ais (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-bdi (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-bei (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-iae (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-lck (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-oci (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-sd (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-ttim`	18.3R1
	`opu-ptim (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-ais (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-bdi (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-iae (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-sd (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-ttim (hold-time (down \| up) \| ignore)`	18.3R1
`tti tti-identifier`	`odu-dapi identifier`	18.3R1
	`odu-expected- receive-dapi identifier`	18.3R1
	`odu-expected- receive-sapi identifier`	18.3R1
	`odu-sapi identifier`	18.3R1
	`otu-dapi identifier`	18.3R1
	`otu-expected- receive-dapi identifier`	18.3R1
	`otu-expected- receive-sapi identifier`	18.3R1
	`otu-sapi identifier`	18.3R1

ACX5448-D 라우터에서 지원되는 OTN 옵션

표 4 은(는) 계층 수준에서 ACX5448-D 라우터에서 [edit interfaces interface-name otn-options] 지원되는 문을 나열합니다.

표 4: ACX5448-D 라우터에서 지원되는 문
문을	옵션	Junos OS
`bytes (otn-options)`	`transmit-payload- type value`	19.2R1
`insert- odu-lck`	-	19.2R1
`insert- odu-oci`	-	19.2R1
`is-ma \| no-is-ma`	-	19.2R1
`line-loopback \| no-line-loopback`	-	19.2R1
`local-loopback \| no-local-loopback`	-	19.2R1
`odu-ttim-action- enable \| no-odu-ttim-action- enable`	-	19.2R1
`otu-ttim-action- enable \| no-otu-ttim-action- enable`	-	19.2R1
`prbs \| no-prbs`	-	19.2R1
`preemptive-fast- reroute`	`backward-frr -enable \| no-backward-frr- enable`	19.2R1
	`signal- degrade- monitor- enable \| no-signal- degrade- monitor-enable`	19.2R1
	`odu-backward- frr-enable \| no-odu-backward- frr-enable`	NA
	`odu-signal-degrade- monitor-enable \| no-odu-signal-degrade- monitor-enable`	NA
`tca`	`odu-tca-bbe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	19.2R1
	`odu-tca-bbe-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	19.2R1
	`odu-tca-es (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	19.2R1
	`odu-tca-es-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	19.2R1
	`odu-tca-ses (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	19.2R1
	`odu-tca-ses-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	19.2R1
	`odu-tca-uas (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	19.2R1
	`otu-tca-bbe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	19.2R1
	`otu-tca-bbe-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	19.2R1
	`otu-tca-es (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	19.2R1
	`otu-tca-es-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	19.2R1
	`otu-tca-ses (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	19.2R1
	`otu-tca-ses-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	19.2R1
	`otu-tca-uas (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	19.2R1
	`otu-tca-uas-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	19.2R1
`trigger trigger-identifier`	`oc-lof (hold-time (down \| up) \| ignore)`	19.2R1
	`oc-lom (hold-time (down \| up) \| ignore)`	19.2R1
	`oc-tsf (hold-time (down \| up) \| ignore)`	19.2R1
	`odu-ais (hold-time (down \| up) \| ignore)`	19.2R1
	`odu-bdi (hold-time (down \| up) \| ignore)`	19.2R1
	`odu-bei (hold-time (down \| up) \| ignore)`	19.2R1
	`odu-iae (hold-time (down \| up) \| ignore)`	19.2R1
	`odu-lck (hold-time (down \| up) \| ignore)`	19.2R1
	`odu-oci (hold-time (down \| up) \| ignore)`	19.2R1
	`odu-sd (hold-time (down \| up) \| ignore)`	19.2R1
	`odu-ttim`	19.2R1
	`opu-ptim (hold-time (down \| up) \| ignore)`	19.2R1
	`otu-ais (hold-time (down \| up) \| ignore)`	19.2R1
	`otu-bdi (hold-time (down \| up) \| ignore)`	19.2R1
	`otu-iae (hold-time (down \| up) \| ignore)`	19.2R1
	`otu-sd (hold-time (down \| up) \| ignore)`	19.2R1
	`otu-ttim (hold-time (down \| up) \| ignore)`	19.2R1
`tti tti-identifier`	`odu-dapi identifier`	19.2R1
	`odu-expected- receive-dapi identifier`	19.2R1
	`odu-expected- receive-sapi identifier`	19.2R1
	`odu-sapi identifier`	19.2R11
	`otu-dapi identifier`	19.2R1
	`otu-expected- receive-dapi identifier`	19.2R1
	`otu-expected- receive-sapi identifier`	19.2R1
	`otu-sapi identifier`	19.2R1

PTX10008 및 PTX10016 시리즈 라우터에서 지원되는 OTN 옵션

표 5 은(는) 계층 수준에서 PTX10008 및 PTX10016 라우터의 PTX10K-LC1104 라인 카드에서 [edit interfaces interface-name otn-options] 지원되는 문을 나열합니다.

표 5: PTX10K-LC1104 라인 카드에서 지원되는 문
문을	옵션	릴리스	지원되는 인터페이스 (ot/et)
`bytes (otn-options)`	`transmit-payload- type value`	18.3R1	동부 표준시
`fec`	`(efec \| gfec \| gfec-sdfec \| none \| ufec)`	18.3R1	오티
`insert- odu-lck`	-	18.3R1	동부 표준시
`insert- odu-oci`	-	18.3R1	동부 표준시
`is-ma \| no-is-ma`	-	18.3R1	동부 표준시
`laser-enable \| no-laser-enable`	-	18.3R1	오티
`line-loopback \| no-line-loopback`	-	18.3R1	오티
`local-loopback \| no-local-loopback`	-	18.3R1	동부 표준시
변조 형식	`qpsk \| 8qam \| 16qam`	18.3R1	오티
`odu-delay- management`	`bypass \| no-bypass`	18.3R1	동부 표준시
	`monitor- end-point \| no-monitor-end-point`	18.3R1
	`number- of-frames value`	18.3R1
	`no-start- measurement \| start- measurement`	18.3R1
`odu-signal- degrade`	`ber-threshold -clear value`	18.3R1	동부 표준시
	`ber-threshold -signal-degrade value`	18.3R1
	`interval value`	18.3R1
`odu-ttim-action- enable \| no-odu-ttim-action- enable`	-	18.3R1	동부 표준시
`otu-ttim-action- enable \| no-otu-ttim-action- enable`	-	18.3R1	동부 표준시
`prbs \| no-prbs`	-	18.3R1	오티
`preemptive-fast- reroute`	`backward-frr -enable \| no-backward-frr- enable`	18.3R1	ot 및 et
	`signal- degrade- monitor- enable \| no-signal- degrade- monitor-enable`	18.3R1
	`odu-backward- frr-enable \| no-odu-backward- frr-enable`	18.3R1
	`odu-signal-degrade- monitor-enable \| no-odu-signal-degrade- monitor-enable`	18.3R1
`rate`	`fixed-stuff-bytes \| no-fixed-stuff-bytes`	18.3R1	동부 표준시
	`oc192`	18.3R1
	`otu4`	18.3R1
	`pass-through \| no-pass-through`	18.3R1
`signal-degrade`	`ber-threshold-clear value`	18.3R1	ot 및 et
	`ber-threshold-signal-degrade value`	18.3R1
	`interval value`	18.3R1
`tca`	`odu-tca-bbe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1	ot 및 et
	`odu-tca-bbe-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-es (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-es-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-ses (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-ses-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-uas (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-bbe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-bbe-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-es (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-es-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-fec-ber (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-ses (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-ses-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-uas (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-uas-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
전송 모니터링	-	18.3R1	동부 표준시
`trigger trigger-identifier`	`oc-lof (hold-time (down \| up) \| ignore)`	18.3R1	ot 및 et
	`oc-lom (hold-time (down \| up) \| ignore)`	18.3R1
	`oc-los (hold-time (down \| up) \| ignore)`	18.3R1
	`oc-tsf (hold-time (down \| up) \| ignore)`	18.3R1
	`oc-wavelength-lock (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-ais (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-bdi (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-bei (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-iae (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-lck (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-oci (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-sd (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-ttim`	18.3R1
	`opu-ptim (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-ais (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-bdi (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-fec-deg (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-fec-exe (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-iae (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-sd (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-ttim (hold-time (down \| up) \| ignore)`	18.3R1
`tti tti-identifier`	`odu-dapi identifier`	18.3R1	동부 표준시
	`odu-expected- receive-dapi identifier`	18.3R1
	`odu-expected- receive-sapi identifier`	18.3R1
	`odu-sapi identifier`	18.3R1
	`otu-dapi identifier`	18.3R1
	`otu-expected- receive-dapi identifier`	18.3R1
	`otu-expected- receive-sapi identifier`	18.3R1
	`otu-sapi identifier`	18.3R1

ACX6360 및 ACX5448-D 라우터에서 지원되는 옵틱 옵션

표 6 은(는) 계층 수준에서 ACX6360 및 ACX5448-D 라우터에서 [edit interfaces interface-name optics-options] 지원되는 문을 나열합니다.

표 6: ACX6360 및 ACX5448-D 라우터에서 지원되는 문
문을	옵션	릴리스	지원되는 인터페이스
Fec	`sdfec \| sdfec15`	18.3R1, 19.2R1-S1	오티
높은 양극화	-	18.2R1, 19.2R1-S1	오티
`laser-enable \| no-laser-enable`	-	18.2R1, 19.2R1-S1	오티
`los-alarm-threshold`	-	18.2R1, 19.2R1-S1	오티
`los-warn-threshold`	-	18.2R1, 19.2R1-S1	오티
변조 형식	`(16qam \| 8qam \| qpsk)`	18.2R1, 19.2R1-S1	오티
`signal-degrade`	`ber-threshold-clear value`	18.3R1, 19.2R1-S1	오티
	`ber-threshold-signal-degrade value`	18.3R1, 19.2R1-S1
	`interval value`	18.3R1, 19.2R1-S1
	`q-threshold-signal-degrade`	18.3R1, 19.2R1-S1
	`q-threshold-signal-degrade-clear`	18.3R1, 19.2R1-S1
`tca`	`carrier-frequency-offset-high-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1	오티
	`carrier-frequency-offset-low-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`fec-ber (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`fec-corrected-errors-high-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`fec-ucorrected-words-high-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`laser-frequency-error-high-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`laser-frequency-error-low-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`pam-histogram-high-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`residual-isi-high-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`residual-isi-low-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`rx-power-high-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`rx-power-low-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`snr-low-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`tec-current-high-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`tec-current-low-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`temperature-high-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`temperature-low-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`tx-power-high-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
	`tx-power-low-tca (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.2R1, 19.2R1-S1
tx-power	Dbm	18.2R1, 19.2R1-S1	오티
파장	Nm	18.2R1, 19.2R1-S1	오티

PTX10008 및 PTX10016 시리즈 라우터에서 지원되는 옵틱 옵션

표 7 은(는) 계층 수준에서 PTX10008 및 PTX10016 시리즈 라우터에서 [edit interfaces interface-name optics-options] 지원되는 문을 나열합니다.

표 7: PTX10008 및 PTX10016 시리즈 라우터에서 지원되는 문
문을	옵션	릴리스	지원되는 인터페이스
알람 저조도 알람	링크 다운 \| Syslog	18.3R1	오티
tca carrier-frequency-offset-high-tca	`(enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1	오티
tx-power	Dbm	18.3R1	오티
경고 저조도 경고	링크 다운 \| Syslog	18.3R1	오티
`laser-enable \| no-laser-enable`	-	18.3R1	오티
`line-loopback \| no-line-loopback`	-	18.3R1	오티
`prbs \| no-prbs`	-	18.3R1	오티
`signal-degrade`	`ber-threshold-clear value`	18.3R1	오티
	`ber-threshold-signal-degrade value`	18.3R1
	`interval value`	18.3R1
`tca`	`odu-tca-bbe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1	오티
	`odu-tca-bbe-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-es (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-es-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-ses (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-ses-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`odu-tca-uas (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-bbe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-bbe-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-es (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-es-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-ses (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-ses-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-uas (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
	`otu-tca-uas-fe (enable-tca \| no-enable-tca \| threshold \| threshold-24hrs)`	18.3R1
`trigger trigger-identifier`	`oc-lof (hold-time (down \| up) \| ignore)`	18.3R1	오티
	`oc-lom (hold-time (down \| up) \| ignore)`	18.3R1
	`oc-los (hold-time (down \| up) \| ignore)`	18.3R1
	`oc-tsf (hold-time (down \| up) \| ignore)`	18.3R1
	`oc-wavelength-lock (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-ais (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-bdi (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-bei (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-iae (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-lck (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-oci (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-sd (hold-time (down \| up) \| ignore)`	18.3R1
	`odu-ttim`	18.3R1
	`opu-ptim (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-ais (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-bdi (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-fec-deg (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-fec-exe (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-iae (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-sd (hold-time (down \| up) \| ignore)`	18.3R1
	`otu-ttim (hold-time (down \| up) \| ignore)`	18.3R1

이 페이지에서