passive (Protocols OSPF)
구문
passive { traffic-engineering { }
계층 수준
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id interface interface-name], [edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface interface-name], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface interface-name], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface interface-name], [edit protocols (ospf | ospf3) area area-id interface interface-name], [edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface interface-name], [edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface interface-name], [edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface interface-name]
설명
해당 인터페이스에서 실제로 OSPF를 실행하지 않고 인터페이스에서 직접 인터페이스 주소를 보급합니다. 패시브 인터페이스는 주소 정보가 OSPF에서 내부 경로로 보급되지만 프로토콜이 실행되지 않는 인터페이스입니다.
OSPF 패시브 트래픽 엔지니어링 모드에서 인터페이스를 구성하려면 문을 포함합니다 traffic-engineering
. OSPF 패시브 트래픽 엔지니어링 모드를 구성하면 OSPF AS 경계 라우터를 동적으로 검색할 수 있습니다.
또는 계층 수준에서 문을 포함하여 interface
인터페이스에서 OSPF [edit protocols (ospf | ospf3) area area-id]
를 [edit routing-instances routing-instance-name protocols ospf area area-id]
활성화합니다. 명령문을 포함하여 disable
비활성화하고, OSPF가 인터페이스에서 실행되지 않도록 하려면 명령문을 포함합니다 passive
. 이 세 가지 상태는 상호 배타적입니다.
필요한 권한 수준
routing - 구성에서 이 명령문을 볼 수 있습니다.
routing-control - 구성에 이 명령문을 추가할 수 있습니다.
릴리스 정보
Junos OS 릴리스 7.4 전에 소개된 명령문입니다.
traffic-engineering 및 remote-node-id address
명령문은 Junos OS 릴리스 8.0에서 소개되었습니다.
트래픽 엔지니어링 및 remote-node-id address
EX 시리즈 스위치용 Junos OS 릴리스 8.0에서 소개된 명령문입니다.
Junos OS 릴리스 9.2에 소개된 realm
명령문을 지원합니다.
EX 시리즈 스위치용 Junos OS 릴리스 9.2에서 소개된 realm
명령문을 지원합니다.