msdp
구문
msdp { disable; active-source-limit { log-interval seconds; log-warning value; maximum number; threshold number; } data-encapsulation (disable | enable); export [ policy-names ]; group group-name { ... group-configuration ... } hold-time seconds; import [ policy-names ]; local-address address; keep-alive seconds; peer address { ... peer-configuration ... } rib-group group-name; source ip-prefix</prefix-length> { active-source-limit { maximum number; threshold number; } } sa-hold-time seconds; traceoptions { file filename <files number> <size size> <world-readable | no-world-readable>; flag flag <flag-modifier> <disable>; } group group-name { disable; export [ policy-names ]; import [ policy-names ]; local-address address; mode (mesh-group | standard); peer address { ... same statements as at the [edit protocols msdp peer address] hierarchy level shown just following ... } traceoptions { file filename <files number> <size size> <world-readable | no-world-readable>; flag flag <flag-modifier> <disable>; } } peer address { disable; active-source-limit { maximum number; threshold number; } authentication-key peer-key; default-peer; export [ policy-names ]; import [ policy-names ]; local-address address; traceoptions { file filename <files number> <size size> <world-readable | no-world-readable>; flag flag <flag-modifier> <disable>; } } }
계층 수준
[edit logical-systems logical-system-name protocols], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols], [edit protocols], [edit routing-instances routing-instance-name protocols]
설명
라우터 또는 스위치에서 MSDP를 활성화합니다. 또한 MSDP가 작동하려면 피어를 하나 이상 구성해야 합니다.
기본
라우터 또는 스위치에서 MSDP가 비활성화되어 있습니다.
옵션
나머지 진술은 별도로 설명됩니다. CLI 탐색기를 참조하십시오.
필요한 권한 수준
routing - 구성에서 이 명령문을 볼 수 있습니다.
routing-control - 구성에 이 명령문을 추가할 수 있습니다.
릴리스 정보
Junos OS 릴리스 7.4 전에 소개된 명령문입니다.