show system boot-messages
통사론
show system boot-messages
구문(EX 시리즈 스위치)
show system boot-messages <all-members> <local> <member member-id>
구문(TX Matrix 라우터)
show system boot-messages <all-chassis | all-lcc | lcc number | scc>
구문(TX Matrix Plus 라우터)
show system boot-messages <all-chassis | all-lcc | lcc number | sfc number>
구문(MX 시리즈 라우터)
show system boot-messages <all-members> <local> <member member-id>
구문(QFX 시리즈)
show system boot-messages infrastructure name | interconnect-device name | node-group name
묘사
이 명령은 시작 시 시스템 커널에서 생성된 초기 메시지를 표시합니다. 이러한 메시지는 /var/run/dmesg.boot의 내용입니다.
옵션
| none | 모든 부팅 시간 메시지를 표시합니다. |
| all-chassis | (TX Matrix 라우터 및 TX Matrix Plus 라우터만 해당) (선택 사항) 모든 섀시에 대한 부팅 시간 메시지를 표시합니다. |
| all-lcc | (TX Matrix 라우터 및 TX Matrix Plus 라우터만 해당) (선택 사항) TX Matrix 라우터에서는 TX Matrix 라우터에 연결된 모든 T640 라우터에 대한 부팅 시간 메시지를 표시합니다. TX Matrix Plus 라우터에서는 연결된 모든 T1600 또는 T4000 LCC에 대한 부팅 시간 메시지를 표시합니다. |
| all-members | (EX4200 스위치 및 MX 시리즈 라우터만 해당) (선택 사항) Virtual Chassis 구성의 모든 멤버에 부팅 시간 메시지를 표시합니다. |
| infrastructure name | (QFabric 시스템만 해당) (선택 사항) 패브릭 제어 라우팅 엔진 또는 패브릭 관리자 라우팅 엔진에 부팅 시간 메시지를 표시합니다. |
| interconnect-device name | (QFabric 시스템만 해당) (선택 사항) 인터커넥트 디바이스에 부팅 시간 메시지를 표시합니다. |
| lcc number | (TX Matrix 라우터 및 TX Matrix Plus 라우터만 해당) (선택 사항) TX Matrix 라우터에서는 TX Matrix 라우터에 연결된 특정 T640 라우터에 대한 부팅 시간 메시지를 표시합니다. TX Matrix Plus 라우터에서는 TX Matrix Plus 라우터에 연결된 특정 라우터에 대한 부팅 시간 메시지를 표시합니다. 회선 카드 섀시(LCC) 구성에 따라 를 다음의 값으로 대체 number 하십시오.
|
| local | (EX4200 스위치 및 MX 시리즈 라우터만 해당) (선택 사항) 로컬 Virtual Chassis 멤버에 부팅 시간 메시지를 표시합니다. |
| member member-id | (EX4200 스위치 및 MX 시리즈 라우터만 해당) (선택 사항) Virtual Chassis 구성의 지정된 멤버에 부팅 시간 메시지를 표시합니다. EX4200 스위치의 경우 을 0에서 9까지의 값으로 대체 |
| node-group name | (QFabric 시스템만 해당) (선택 사항) 노드 그룹에 부팅 시간 메시지를 표시합니다. |
| scc | (TX Matrix 라우터만 해당) (선택 사항) TX Matrix 라우터(또는 스위치 카드 섀시)의 부팅 시간 메시지를 표시합니다. |
| sfc number | (TX Matrix Plus 라우터만 해당) (선택 사항) TX Matrix Plus 라우터에 대한 부팅 시간 메시지를 표시합니다. 0으로 대체하십시오 number . |
추가 정보
기본적으로 TX Matrix 라우터 또는 TX Matrix Plus 라우터의 기본 라우팅 엔진에서 명령을 실행 show system boot-messages 하면 라우팅 매트릭스에서 연결된 LCC의 모든 기본 라우팅 엔진으로 명령이 브로드캐스트됩니다. 마찬가지로 TX Matrix 또는 TX Matrix Plus 라우터의 백업 라우팅 엔진에서 동일한 명령을 실행하면 라우팅 매트릭스에서 연결된 LCC의 모든 백업 라우팅 엔진으로 명령이 브로드캐스트됩니다.
필요한 권한 수준
보기
샘플 출력
- show system boot-messages(TX Matrix 라우터)
- show system boot-messages lcc(TX Matrix 라우터)
- show system boot-messages(TX Matrix Plus 라우터)
- show system boot-messages(QFX3500 스위치)
- show system boot-messages(SRX300)
show system boot-messages(TX Matrix 라우터)
user@host> show system boot-messages
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1996-2000 Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
JUNOS 4.1-20000216-Zf8469 #0: 2000-02-16 12:57:28 UTC
builder@device1.example.com:/p/build/20000216-0905/4.1/release_kernel/sys/compil
e/GENERIC
CPU: Pentium Pro (332.55-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping=10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,<b
16>,<b17>,MMX,<b24>>
Teknor CPU Card Recognized
real memory = 805306368 (786432K bytes)
avail memory = 786280448 (767852K bytes)
Probing for devices on PCI bus 0:
chip0 <generic PCI bridge (vendor=8086 device=7192 subclass=0)> rev 3 class 6000
0 on pci0:0:0
chip1 <Intel 82371AB PCI-ISA bridge> rev 1 class 60100 on pci0:7:0
chip2 <Intel 82371AB IDE interface> rev 1 class 10180 on pci0:7:1
chip3 <Intel 82371AB USB interface> rev 1 class c0300 int d irq 11 on pci0:7:2
smb0 <Intel 82371AB SMB controller> rev 1 class 68000 on pci0:7:3
pcic0 <TI PCI-1131 PCI-CardBus Bridge> rev 1 class 60700 int a irq 15 on pci0:13
:0
TI1131 PCI Config Reg: [pci only][FUNC0 pci int]
pcic1 <TI PCI-1131 PCI-CardBus Bridge> rev 1 class 60700 int b irq 12 on pci0:13
:1
TI1131 PCI Config Reg: [pci only][FUNC1 pci int]
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 8 class 20000 int a irq 12 on
pci0:16:0
chip4 <generic PCI bridge (vendor=1011 device=0022 subclass=4)> rev 4 class 6040
0 on pci0:17:0
fxp1 <Intel EtherExpress Pro 10/100B Ethernet> rev 8 class 20000 int a irq 10 on
pci0:19:0
Probing for devices on PCI bus 1:
mcs0 <Miscellaneous Control Subsystem> rev 12 class ff0000 int a irq 12 on pci1:
13:0
fxp2 <Intel EtherExpress Pro 10/100B Ethernet> rev 8 class 20000 int a irq 10 on
pci1:14:0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: EGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x300
ed1 not found at 0x280
ed2 not found at 0x340
psm0 not found at 0x60
sio0 at 0x3f8-0x3ff irq 4 flags 0x20010 on isa
sio0: type 16550A, console
sio1 at 0x3e8-0x3ef irq 5 flags 0x20000 on isa
sio1: type 16550A
sio2 at 0x2f8-0x2ff irq 3 flags 0x20000 on isa
sio2: type 16550A
pcic0 at 0x3e0-0x3e1 on isa
PC-Card ctlr(0) TI PCI-1131 [CardBus bridge mode] (5 mem & 2 I/O windows)
pcic0: slot 0 controller I/O address 0x3e0
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 not found at 0x3f0
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <SunDisk SQFXB-80>, single-sector-i/o
wd0: 76MB (156672 sectors), 612 cyls, 8 heads, 32 S/T, 512 B/S
wdc0: unit 1 (wd1): <IBM-DCXA-210000>
wd1: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
wdc2 not found at 0x180
ep0 not found at 0x300
fxp0: Ethernet address 00:a0:a5:12:05:5a
fxp1: Ethernet address 00:a0:a5:12:05:59
fxp2: Ethernet address 02:00:00:00:00:01
swapon: adding /dev/wd1s1b as swap device
Automatic reboot in progress...
/dev/rwd0s1a: clean, 16599 free (95 frags, 2063 blocks, 0.1% fragmentation)
/dev/rwd0s1e: clean, 9233 free (9 frags, 1153 blocks, 0.1% fragmentation)
/dev/rwd0s1a: clean, 16599 free (95 frags, 2063 blocks, 0.1% fragmentation)
/dev/rwd1s1f: clean, 4301055 free (335 frags, 537590 blocks, 0.0% fragmentation)
show system boot-messages lcc(TX Matrix 라우터)
user@host> show system boot-messages lcc 2
lcc2-re0:
--------------------------------------------------------------------------
Copyright (c) 1996-2001, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 7.0-20040912.0 #0: 2004-09-12 09:16:32 UTC
builder@device1.example.com:/build/benten-b/7.0/20040912.0/obj-i386/sys/compile/JUNIPER
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 601368936 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (601.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 2147467264 (2097136K bytes)
sio0: gdb debugging port
avail memory = 2084040704 (2035196K bytes)
Preloaded elf kernel "kernel" at 0xc06d9000.
DEVFS: ready for devices
Pentium Pro MTRR support enabled
md0: Malloc disk
DRAM Data Integrity Mode: ECC Mode with h/w scrubbing
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcic-pci0: <TI PCI-1410 PCI-CardBus Bridge> irq 15 at device 1.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [pwr save][pci only]
fxp0: <Intel Embedded 10/100 Ethernet> port 0x1000-0x103f mem 0xfb800000-0xfb81ffff,0xfb820000-0xfb820fff irq 9 at device 3.0 on pci0
fxp1: <Intel Embedded 10/100 Ethernet> port 0x1040-0x107f mem 0xfb840000-0xfb85ffff,0xfb821000-0xfb821fff irq 11 at device 4.0 on pci0
...
show system boot-messages(TX Matrix Plus 라우터)
user@host> show system boot-messages
sfc0-re0:
--------------------------------------------------------------------------
Copyright (c) 1996-2009, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 9.6B3.3 #0: 2009-06-17 19:52:08 UTC
builder@device1.example.com:/volume/build/junos/9.6/release/9.6B3.3/obj-i386/bsd/sys/compile/JUNIPER
MPTable: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU L5238 @ 2.66GHz (2660.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff
...
lcc1-re0:
--------------------------------------------------------------------------
Copyright (c) 1996-2009, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 9.6-20090617.0 #0: 2009-06-17 04:15:14 UTC
builder@device1.example.com:/volume/build/junos/9.6/production/20090617.0/obj-i386/bsd/sys/compile/JUNIPER
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU @ 1.86GHz (1862.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xbfebfbff
...
show system boot-messages(QFX3500 스위치)
user@switch> show system boot-messages
getmemsize: msgbufp[size=32768] = 0x81d07fe4
System physical memory distribution:
-------------------------------------------------------------------------------
Total physical memory: 4160749568 (3968 MB)
Physical memory used: 3472883712 (3312 MB)
Physical memory allocated to kernel: 2130706432 (2032 MB)
Physical memory allocated to user BTLB: 1342177280 (1280 MB)
-------------------------------------------------------------------------------
Copyright (c) 1996-2010, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 11.1I #0: 2010-09-17 19:18:07 UTC
user@device1.example.com:/c/user/DEV_QFX_SI_BRANCH/03/20100917.399988/
obj-xlr/bsd/sys/compile/JUNIPER-DCTOR
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
JUNOS 11.1I #0: 2010-09-17 19:18:07 UTC
user@device1.example.com:/c/user/DEV_QFX_SI_BRANCH/03/20100917.399988/
obj-xlr/bsd/sys/compile/JUNIPER-DCTOR
real memory = 3472883712 (3312MB)
avail memory = 1708171264 (1629MB)
cpuid: 0, btlb_cpumap:0xfffffff8
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
ETHERNET SOCKET BRIDGE initialising
Initializing QFX platform properties ..
cpu0 on motherboard
: RMI's XLR CPU Rev. 0.3 with no FPU implemented
L1 Cache: I size 32kb(32 line), D size 32kb(32 line), eight way.
L2 Cache: Size 1024kb, eight way
pic_lbus0: <XLR Local Bus>
pic_lbus0: <XLR Local Bus> on motherboard
Enter qfx control ethernet probe addr:0xc5eeec00
gmac4: <XLR GMAC GE Ethernet> on pic_lbus0
me0: Ethernet address 00:1d:b5:f7:68:40
Enter qfx control ethernet probe addr:0xc5eeeb40
gmac5: <XLR GMAC GE Ethernet> on pic_lbus0
me1: Ethernet address 00:1d:b5:f7:68:41
Enter qfx control ethernet probe addr:0xc5eeea80
gmac6: <XLR GMAC GE Ethernet> on pic_lbus0
me1: Ethernet address 00:1d:b5:f7:68:42
sio0 on pic_lbus0
Entering sioattach
sio0: type 16550A, console
xls_setup_intr: skip irq 3, xlr regs are set up somewhere else.
gblmem0 on pic_lbus0
ehci0: <RMI XLS USB 2.0 controller> on pic_lbus0
ehci_bus_attach: allocated resource. tag=1, base=bef24000
xls_ehci_init: endian hardware swapping NOT enabled.
usb0: EHCI version 1.0
usb0 on ehci0
usb0: USB revision 2.0
uhub0: vendor 0x0000 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: USB USBFlashDrive, rev 2.00/11.00, addr 2
pcib0: PCIe link 0 up
pcib0: PCIe link 2 up
pcib0: PCIe link 3 up
pcib0: <XLS PCI Host Controller> on pic_lbus0
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 0.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <network, ethernet> at device 0.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 1.0 on pci0
pcib3: <PCI-PCI bridge> at device 2.0 on pci0
pci2: <PCI bus> on pcib3
pci2: <network, ethernet> at device 0.0 (no driver attached)
pcib4: <PCI-PCI bridge> at device 3.0 on pci0
pci3: <PCI bus> on pcib4
pci3: <network, ethernet> at device 0.0 (no driver attached)
cfi device address space at 0xbc000000
cfi0: <AMD/Fujitsu - 8MB> on pic_lbus0
cfi device address space at 0xbc000000
i2c0: <I2C bus controller> on pic_lbus0
i2c1: <I2C bus controller> on pic_lbus0
qfx_fmn0 on pic_lbus0
pool offset 1503776768
xlr_lbus0: <XLR Local Bus Controller> on motherboard
qfx_bcpld_probe[124]
qfx_bcpld_probe[138]: dev_type=0x0
qfx_bcpld_probe[124]
qfx_bcpld0: QFX BCPLD probe success
qfx_bcpld0qfx_bcpld_attach[174]
qfx_bcpld_attach[207] : bus_space_tag=0x0, bus_space_handle=0xbd900000
qfx_bcpld_probe[124]
qfx_bcpld1: QFX BCPLD probe success
qfx_bcpld1qfx_bcpld_attach[174]
tor_bcpld_slave_attach[1245] : bus_space_tag=0x0, bus_space_handle=0xbda00000
Initializing product: 96 ..
bmeb: bmeb_lib_init done 0xc60a5000, addr 0x809c99a0
bme0:Virtual BME driver initializing
Timecounter "mips" frequency 1200000000 Hz quality 0
Timecounter "xlr_pic_timer" frequency 66666666 Hz quality 1
Timecounters tick every 1.000 msec
Loading the NETPFE fc module
IPsec: Initialized Security Association Processing.
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #8 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB USBFlashDrive 1100> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 3920MB (8028160 512 byte sectors: 255H 63S/T 499C)
Trying to mount root from ufs:/dev/da0s1a
show system boot-messages(SRX300)
user@host> show system boot-messages |no-more
kld_map_v: 0x8ff80000, kld_map_p: 0x0
Running in PARTITIONED TLB MODE
Copyright (c) 1996-2022, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 21.2R3-S2.9 #0: 2022-07-16 04:20:05 UTC
builder@example1.juniper.net:/volume/build/junos/21.2/release/21.2R3-S2.9/obj/bsd6/octeon/junos/bsd/kernels/JSRXNLE/kernel
can't re-use a leaf (perf_mon)!
can't re-use a leaf (threshold)!
can't re-use a leaf (debug)!
JUNOS 21.2R3-S2.9 #0: 2022-07-16 04:20:05 UTC
builder@example1.juniper.net:/volume/build/junos/21.2/release/21.2R3-S2.9/obj/bsd6/octeon/junos/bsd/kernels/JSRXNLE/kernel
real memory = 4294967296 (4194304K bytes) avail memory = 2286268416 (2180MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Security policy loaded: Junos MAC/veriexec (mac_veriexec) Security policy loaded: JUNOS MAC/pcap (mac_pcap) Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot) MAC/veriexec fingerprint module loaded: SHA1 MAC/veriexec fingerprint module loaded: SHA256
netisr_init: forcing maxthreads from 4 to 2
random: <Software, Yarrow> initialized
cpu0 on motherboard
: CAVIUM's OCTEON 70XX/71XX CPU Rev. 0.2 with no FPU implemented
L1 Cache: I size 78kb(128 line), D size 32kb(128 line), thirty two way.
L2 Cache: Size 512kb, 4 way
obio0 on motherboard
uart0: <Octeon-16550 channel 0> on obio0
uart0: console (9600,n,8,1)
twsi0 on obio0
set clock 0x49
xhci0: <Cavium Octeon 7xxx xHCI Host Driver> on obio0
usb0: <USB bus for xHCI Controller> on xhci0
usb0: USB revision 3.0
uhub0: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
xhci1: <Cavium Octeon 7xxx xHCI Host Driver> on obio0
usb1: <USB bus for xHCI Controller> on xhci1
usb1: USB revision 3.0
uhub1: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
cpld0 on obio0
pcib0: <Cavium on-chip PCIe HOST bridge> on obio0 Disabling Octeon big bar support
pcib0: Initialized controller
pci0: <PCI bus> on pcib0
pci0: <network, ethernet> at device 0.0 (no driver attached)
pci0: <network, ethernet> at device 0.1 (no driver attached)
gblmem0 on obio0
octpkt0: <Octeon RGMII> on obio0
boot_bus0 on obio0
cfi0: <Macronix MX25L64 - 8MB> on boot_bus0
cfi1: <Macronix MX25L64 - 8MB> on boot_bus0
umass0: ATP Electronics ATP CG eUSB, rev 2.00/11.00, addr 2 Timecounter "mips" frequency 1200000000 Hz quality 0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ATP ATP CG eUSB 1100> Fixed Direct Access SCSI-4 device
da0: 40.000MB/s transfers
da0: 7672MB (15712256 512 byte sectors: 255H 63S/T 978C)
random: unblocking device.
hwpmc: OCTEON/4/64/0x1ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA>
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: / was not properly dismounted
WARNING: R/W mount of /cf/var denied. Filesystem is not clean - run fsck
LPC bus driver
lpcbus0 on cpld0
tpm0: <Trusted Platform Module> on lpcbus0
tpm: IFX SLB 9660 TT 1.2 rev 0x10
릴리스 정보
Junos OS 릴리스 7.4 전에 소개된 명령입니다.
sfc Junos OS 릴리스 9.6에서 TX Matrix Plus 라우터에 대해 소개된 옵션입니다.