show ptp port
構文
show ptp port <brief | detail> ifl logical-interface-name
説明
(MX80、MX240、MX480、MX960、PTX10004、PTX10008、ACX710ルーター)設定に従って作成されたポート数に関する情報を表示します。一意のローカル IP アドレスごとに、1 つの高精度時刻同期プロトコル ポートが作成されます。
オプション
brief | PTP ポートに関する情報の概要を表示します。 |
detail | PTP ポートに関する情報を詳細に表示します。 |
logical-interface-name | 特定の論理インターフェイスの PTP ポート情報を表示します。 |
必要な権限レベル
ビュー
出力フィールド
表 1 に、このコマンドの出力フィールド show ptp port
を示します。出力フィールドは、表示されるおおよその順序に従って示しています。
フィールド名 |
フィールドの説明 |
---|---|
ローカルインターフェイス |
ローカル論理インターフェイス。 |
|
クライアントとして機能するインターフェイスのIPアドレス。 |
|
リモート・ノードの IP アドレス。 |
|
作成された各セッションの一意のインデックス。 |
|
ポートの状態が変更された合計回数。 |
|
ポートの状態が最後に変更されてからの経過時間。 |
|
クライアントの IP アドレス。 |
|
ポートのステータス: |
|
クライアントからプライマリに送信された遅延要求メッセージ間の秒数。 |
|
プライマリがアナウンスするメッセージが送信される対数平均間隔。 |
|
アナウンス メッセージを受信せずに、クライアントとプライマリの間でアナウンス間隔メッセージが通過する必要がある回数。 |
|
1 次側が送信する同期間隔メッセージの対数平均間隔。 |
|
使用される遅延メカニズムのタイプ。 |
|
PTP ポート番号。 |
|
ノードのクロック モード。 |
|
プライマリの一意のクロック ID。 |
|
前回のアナウンス メッセージ。 |
|
現在のアナウンス メッセージ。 |
サンプル出力
- PTPポートブリーフを表示
- PTPポートの詳細を表示
- PTPポートIFLを表示
- PTPポートの詳細を表示(PTX10008)
- PTPポートステータスを表示(PTX10008)
- show ptp port(PTX10004、PTX10008)(PTPパッシブポート監視が有効で、非マスターおよびメジャー専用として設定)
- show ptp port(PTX10004、PTX10008)(PTPパッシブポート監視が有効で、非マスターとして設定)
- show ptp port(PTX10004、PTX10008)(PTPパッシブポート監視が有効で、測定のみとして設定されています)
PTPポートブリーフを表示
user@host> show ptp port brief PTP port-data: Local Interface : xe-0/0/18.0 Local Address : 98:a4:04:7f:19:15 Remote Address : 01:1b:19:00:00:00 Clock Stream : 0 Clock Identity : 98:a4:04:ff:fe:7f:19:7f State Changes : 2 Last Change : 00:03:08 ago Port State : Master Delay Req Interval: -4 Announce Interval : -3 Announce Timeout : 3 Sync Interval : -4 Delay Mechanism : End-to-end Port Number : 1 Operating Mode : Stateful Local Interface : xe-0/0/18.0 Local Address : 98:a4:04:7f:19:15 Remote Address : 01:1b:19:00:00:00 Clock Stream : 0 Clock Identity : 98:a4:04:ff:fe:7f:19:7f State Changes : 2 Last Change : 00:03:08 ago Port State : Master Delay Req Interval: -4 Announce Interval : -3 Announce Timeout : 3 Sync Interval : -4 Delay Mechanism : End-to-end Port Number : 1 Operating Mode : Stateful
PTPポートの詳細を表示
user@host> show ptp port detail PTP port-data: Local Interface : xe-0/0/18.0 Local Address : 98:a4:04:7f:19:15 Remote Address : 01:1b:19:00:00:00 Clock Stream : 0 Clock Identity : 98:a4:04:ff:fe:7f:19:7f State Changes : 2 Last Change : 00:03:08 ago Port State : Master Delay Req Interval: -4 Announce Interval : -3 Announce Timeout : 3 Sync Interval : -4 Delay Mechanism : End-to-end Port Number : 1 Operating Mode : Stateful Local Priority : 128 Asymmetry : 0 Vlan-id : <null> Priority : <null> Foreign Master Clock Details: Master Clock Id : 98:a4:04:ff:fe:7f:19:7f Previous Announce Messages : 0 Current Announce Messages : 0 Local Interface : xe-0/0/7.0 Local Address : 98:a4:04:7f:19:0a Remote Address : 01:1b:19:00:00:00 Clock Stream : 1 Clock Identity : 98:a4:04:ff:fe:7f:19:7f State Changes : 2 Last Change : 00:03:08 ago Port State : Slave Delay Req Interval: -4 Announce Interval : -3 Announce Timeout : 3 Sync Interval : -4 Delay Mechanism : End-to-end Port Number : 2 Operating Mode : Stateful Local Priority : 128 Asymmetry : 0 Vlan-id : <null> Priority : <null> Foreign Master Clock Details: Master Clock Id : 98:a4:04:ff:fe:80:3a:7f Previous Announce Messages : 0 Current Announce Messages : 0
PTPポートIFLを表示
user@host> show ptp port ifl ge-1/0/5.0 PTP port-data: Local Interface : ge-1/0/5.0 Local Address : 2001:db8:00:05:85:73:b0:aa Remote Address : 01:1b:19:00:00:00 Clock Stream : 1 Clock Identity : 98:a4:04:ff:fe:7f:19:7f State Changes : 2 Last Change : 00:03:08 ago Port State : Slave Delay Req Interval: -4 Announce Interval : -3 Announce Timeout : 3 Sync Interval : -4 Delay Mechanism : End-to-end Port Number : 2 Operating Mode : Stateful Local Priority : 128 Asymmetry : 0 Vlan-id : <null> Priority : <null> Foreign Master Clock Details: Master Clock Id : 98:a4:04:ff:fe:80:3a:7f Previous Announce Messages : 0 Current Announce Messages : 0
PTPポートの詳細を表示(PTX10008)
user@host> show ptp port detail PTP port-data: Local Interface : et-6/0/16:2.0 Local Address : e4:5d:37:4e:d0:96 Remote Address : 01:1b:19:00:00:00 Clock Stream : 1 Clock Identity : 98:a4:04:ff:fe:7f:19:7f State Changes : 2 Last Change : 00:03:08 ago Port State : Slave Delay Req Interval: -4 Announce Interval : -3 Announce Timeout : 3 Sync Interval : -4 Delay Mechanism : End-to-end Port Number : 2 Operating Mode : Stateful Local Priority : 128 Asymmetry : 0 Vlan-id : <null> Priority : <null> Foreign Master Clock Details: Master Clock Id : 98:a4:04:ff:fe:80:3a:7f Previous Announce Messages : 0 Current Announce Messages : 0
PTPポートステータスを表示(PTX10008)
user@host> show ptp port detail PTP port-data: Local Interface : et-6/0/16:2.0 Local Address : e4:5d:37:4e:d0:96 Remote Address : 01:1b:19:00:00:00 Clock Stream : 1 Clock Identity : 98:a4:04:ff:fe:7f:19:7f State Changes : 2 Last Change : 00:03:08 ago Port State : Slave Delay Req Interval: -4 Announce Interval : -3 Announce Timeout : 3 Sync Interval : -4 Delay Mechanism : End-to-end Port Number : 2 Operating Mode : Stateful Local Priority : 128 Asymmetry : 0 Vlan-id : <null> Priority : <null> Foreign Master Clock Details: Master Clock Id : 98:a4:04:ff:fe:80:3a:7f Previous Announce Messages : 0 Current Announce Messages : 0
show ptp port(PTX10004、PTX10008)(PTPパッシブポート監視が有効で、非マスターおよびメジャー専用として設定)
user@host> show ptp port PTP port-data: Local Interface : et-0/0/16:1.0 Local Address : e4:5d:37:4e:c8:19 Remote Address : 01:1b:19:00:00:00 Clock Stream : 5 Clock Identity : e4:5d:37:ff:fe:4e:d7:76 Port State : Passive Delay Req Interval: -4 Announce Interval : -3 Announce Timeout : 3 Sync Interval : -4 Delay Mechanism : End-to-end Port Number : 2 Operating Mode : Stateful, Not-master, Measure-only Local Priority : 128
show ptp port(PTX10004、PTX10008)(PTPパッシブポート監視が有効で、非マスターとして設定)
user@host> show ptp port PTP port-data: Local Interface : et-0/0/16:1.0 Local Address : e4:5d:37:4e:c8:19 Remote Address : 01:1b:19:00:00:00 Clock Stream : 5 Clock Identity : e4:5d:37:ff:fe:4e:d7:76 Port State : Passive Delay Req Interval: -4 Announce Interval : -3 Announce Timeout : 3 Sync Interval : -4 Delay Mechanism : End-to-end Port Number : 2 Operating Mode : Stateful, Not-master Local Priority : 128
show ptp port(PTX10004、PTX10008)(PTPパッシブポート監視が有効で、測定のみとして設定されています)
user@host> show ptp port PTP port-data: Local Interface : et-0/0/16:1.0 Local Address : e4:5d:37:4e:c8:19 Remote Address : 01:1b:19:00:00:00 Clock Stream : 5 Clock Identity : e4:5d:37:ff:fe:4e:d7:76 Port State : Passive Delay Req Interval: -4 Announce Interval : -3 Announce Timeout : 3 Sync Interval : -4 Delay Mechanism : End-to-end Port Number : 2 Operating Mode : Stateful, Measure-only Local Priority : 128
リリース情報
Junos OSリリース12.2で導入されたコマンド。
ifl logical-interface-name added in Junos OS Release 16.1.