[ Contents] [ Prev] [ Next] [ Report an Error]

Safety Warnings

Warning: See installation instructions before connecting the device. This is a summary of safety warnings. For a complete list of warnings for this device, including translations, see the SRX 5800 Services Gateway Hardware Guide at https://www.juniper.net/techpubs/hardware/.

Warning: The intrabuilding port(s) of the device is suitable for connection to intrabuilding or unexposed wiring or cabling only. The intrabuilding port(s) of the device MUST NOT be metallically connected to interfaces that connect to the OSP or its wiring. These interfaces are designed for use as intrabuilding interfaces only (Type 2 or Type 4 ports as described in GR-1089-CORE, Issue 4) and require isolation from the exposed OSP cabling. The addition of primary protectors is not sufficient protection to connect these interfaces metallically to OSP wiring.

Caution: Before removing or installing components of a device, attach an ESD strap to an ESD point and place the other end of the strap around your bare wrist. Failure to use an ESD strap could result in damage to the device.


[ Contents] [ Prev] [ Next] [ Report an Error]