[ Contents] [ Prev] [ Next] [ Report an Error]

Remove Components

Before lifting the device, you must remove the following components:

To remove the components from the device:

  1. Slide each component out of the chassis evenly so that it does not become stuck or damaged.
  2. Label each component as you remove it so you can reinstall it in the correct location.
  3. Immediately store each removed component in an electrostatic bag.
  4. Do not stack removed components. Lay each one on a flat surface.

Note: For complete instructions on removing device components, see “Install the Services Gateway Without a Mechanical Lift” in the SRX 5800 Services Gateway Hardware Guide.


[ Contents] [ Prev] [ Next] [ Report an Error]