[ Contents] [ Prev] [ Next] [ Report an Error]

Reinstall Components

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis. For more information about ESD, see the SRX 5800 Services Gateway Hardware Guide.
  2. Slide each component into the chassis evenly so that it does not become stuck or damaged.
  3. Tighten the captive screws or lock any levers for each component installed.

Note: Make sure that all empty slots are covered with blank panels before operating the device.


[ Contents] [ Prev] [ Next] [ Report an Error]