[ Contents] [ Prev] [ Next] [ Report an Error]

Install the Mounting Hardware in an Open-Frame Rack

  1. On the rear of each rack rail, partially insert a mounting screw into the highest hole specified in Table 3.
  2. Install the large shelf on the rack. Hang the shelf over the mounting screws using the keyhole slots located near the top of the large shelf flanges.
  3. Partially insert screws into the open holes in the ears of the large shelf.
  4. Tighten all the screws completely.

Table 3: Open-Frame Rack Mounting Hole Locations

Hole

Distance Above “U” Division

30

17.26 in. (43.8 cm)

9.86 U

27

15.51 in. (39.4 cm)

8.86 U

24

13.76 in. (34.9 cm)

7.86 U

21

12.01 in. (30.5 cm)

6.86 U

18

10.26 in. (26.0 cm)

5.86 U

15

8.51 in. (21.6 cm)

4.86 U

12

6.76 in. (17.1 cm)

3.86 U

9

5.01 in. (12.7 cm)

2.86 U

6

3.26 in. (8.3 cm)

1.86 U

3

1.51 in. (3.8 cm)

0.86 U

2

0.88 in. (2.2 cm)

0.50 U

Figure 3: Mounting Hardware for an Open-Frame Rack

Image g003795.gif


[ Contents] [ Prev] [ Next] [ Report an Error]