[ Contents] [ Prev] [ Next] [ Report an Error]

Installing a Fan Tray

To install a fan tray (see Figure 7 and Figure 8):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis. For more information about ESD, see Preventing Electrostatic Discharge Damage.
  2. Grasp the fan tray on each side and insert it straight into the chassis. Note the correct orientation by the "this side up" label on the top surface of the fan tray.
  3. Tighten the captive screws on each side of the fan tray faceplate to secure it in the chassis.
  4. Lower the cable management system back into position, if necessary.

Figure 7: Installing an Upper Fan Tray

Image g030223.gif

Figure 8: Installing a Lower Fan Tray

Image g030225.gif

[ Contents] [ Prev] [ Next] [ Report an Error]