[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Verifying Parts Received

A packing list is included in each shipment. Check the parts in the shipment against the items on the packing list. The packing list specifies the part numbers and descriptions of each part in your order.

If any part is missing, contact a customer service representative.

A fully configured services gateway contains the chassis with installed components, listed in Table 23, and an accessory box, which contains the parts listed in Table 24. The parts shipped with your device can vary depending on the configuration you ordered.

Table 23: Parts List for a Fully Configured Services Gateway

Component

Quantity

Chassis, including midplane, craft interface, and rack-mounting brackets

1

IOCs

Up to 5

SPCs

Up to 5

Routing Engines

1 or 2

SCBs

1 or 2

Power supplies

Up to 4

Fan tray

1

Air filter

1

Air filter tray

1

Getting Started Guide

1

Small mounting shelf

1

Blank panels for slots without components installed

One blank panel for each slot not occupied by a component

Table 24: Accessory Box Parts List

Part

Quantity

Screws to mount chassis and small shelf

22

DC power terminal Lugs, 6-AWG

8

RJ-45-to-DB-9 cable to connect the device through the serial port

1

Cable manager brackets

2

Terminal block plug, 3–pole, 5.08 mm spacing, 12A, to connect the device alarms

2

Label, accessories contents, SRX 5600

1

USB flash drive with JUNOS

1

Read me first document

1

Affidavit for T1 connection

1

Juniper Networks Product Warranty

1

End User License Agreement

1

Document sleeve

1

3 in. x 5 in. pink bag

2

9 in. x 12 in. pink bag, ESD

2

Accessory Box, 19 in. x 12 in. x 3 in.

1

Ethernet cable, RJ-45/RJ-45, 4-pair stranded UTP, Category 5E, 15'

1

ESD wrist strap with cable

1


[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]