[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Installing the Services Gateway Without a Mechanical Lift

If you cannot use a mechanical lift to install the services gateway (the preferred method), you can install it manually. Before installing the device manually, you must first remove components from the chassis, and you must reinstall the components once the device is installed in the rack. At least two people are needed to safely lift the chassis into the rack or cabinet. With components removed, the chassis weighs approximately 65.5 lb (29.7 kg).

Before installing the device in the rack, read the safety information in Chassis Lifting Guidelines. Remove the device from the shipping container as described in Unpacking the Services Gateway. Install the mounting hardware as described in Installing the Mounting Hardware.

This appendix discusses the following device installation topics:


[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]