[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Installing the Fan Tray

To install the fan tray (see Figure 43):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis. For more information about ESD, see Preventing Electrostatic Discharge Damage.
  2. Grasp the fan tray handle and insert it straight into the chassis. Note the correct orientation by the this side up label on the top surface of the fan tray.
  3. Tighten the captive screws on the fan tray faceplate to secure it in the chassis.

Figure 43: Installing the Fan Tray

Image g004226.gif


[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]