[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Installing the Cable Management System

The cable management system attaches to both sides of the card cage. To install the cable management system (see Figure 29):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis. For more information about ESD, see Preventing Electrostatic Discharge Damage.
  2. Position the cable management system on the front sides of the chassis.
  3. Insert the tabs into the slots.
  4. Tighten the captive screws completely.

Figure 29: Installing the Cable Management System

Image g030240.gif


[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]