Do not attempt to lift a fully configured services gateway by yourself.
Using a mechanical lift to maneuver the services gateway into a rack
is recommended. If a lift cannot be used, a minimum of two people
must lift the services gateway, and you must remove components from the
chassis before lifting. For lifting and component removal instructions,
see Setting Up the Services Gateway.
Before lifting or moving the services gateway, disconnect
all external cables.
As when lifting any heavy object, lift most of the weight
with your legs rather than your back. Keep your knees bent and your
back relatively straight and avoid twisting your body as you lift.
Balance the load evenly and be sure that your footing is solid.