[ Contents] [ Prev] [ Next] [ Report an Error]

Installing the Craft Interface

To install the craft interface (see Figure 5):

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis. For more information about ESD, see Preventing Electrostatic Discharge Damage.
  2. Grasp the craft interface with one hand and hold the bottom edge of the craft interface with the other hand to support its weight.
  3. Orient the ribbon cable so that it plugs into the connector socket. The connector is keyed and can be inserted only one way.
  4. Align the bottom of the craft interface with the sheet metal above the card cage and press it into place.
  5. Tighten the screws on the left and right corners of the craft interface faceplate.
  6. Reattach any external devices connected to the craft interface.

Figure 5: Installing a Craft Interface

Image g004040.gif


[ Contents] [ Prev] [ Next] [ Report an Error]