[ Contents] [ Prev] [ Next] [ Report an Error]

Installing an AC Power Supply

To install an AC power supply:

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis. For more information about ESD, see Preventing Electrostatic Discharge Damage.
  2. Orient the power supply as follows:

    Figure 2: Installing an AC Power Supply, SRX 3400

    Image g036017.gif

    Figure 3: Installing an AC Power Supply, SRX 3600

    Image g036052.gif

  3. Using both hands, slide the power supply straight into the chassis until the power supply is fully seated in the chassis slot. The power supply faceplate should be flush with any power supply faceplate or blank installed in the adjacent power supply slot.

See Connecting Power to an AC-Powered Services Gateway for information on connecting the power supply to AC power.


[ Contents] [ Prev] [ Next] [ Report an Error]