J Series Services Routers Hardware Guide
Copyright and Trademark Information- Table of Contents
-
About This Guide - Services Router Overview
- Overview of Services Routers
- J Series Services Router Hardware Features
- PIM Overview
- PIM Terms
- Field-Replaceable PIMs
- J2320 and J2350 Field-Replaceable PIM and Module Summary
- J4350 and J6350 Field-Replaceable PIM Summary
- 1-Port, 6-Port, 8-Port, and 16-Port Gigabit Ethernet uPIMs
- 1-Port Gigabit Ethernet ePIMs
- Dual-Port Serial PIM
- Dual-Port T1 or E1 PIM
- Dual-Port Channelized T1/E1/ISDN PRI PIM
- T3 or E3 PIM
- Dual-Port Fast Ethernet PIM
- 4-Port Fast Ethernet ePIM
- 4-Port ISDN BRI PIMs
- ADSL PIM
- G.SHDSL PIM
-
- Installing a Services Router
- Preparing for Router Installation
- Installing and Connecting a Services Router
- Establishing Basic Connectivity
- Basic Connectivity Terms
- Basic Connectivity Overview
- Before You Begin
- Connecting to a Services Router
- Configuring Basic Settings with J-Web
- Configuring Basic Settings Using the CLI Configuration Wizard
- Configuring Basic Settings with a Configuration Editor
- Verifying Basic Connectivity and the Configuration
- Installing JUNOS Software
-
- Maintaining Services Router Hardware
- Replacing Hardware Components
- Tools and Parts Required
- Replacing the Console Port Cable
- Replacing a PIM
- Replacing PIM Cables
- Removing and Replacing the Chassis Cover on J2320 and J2350
Routers
- Replacing Internal Compact Flashes on J2320 and J2350 Routers
- Replacing Internal Compact Flashes on J4350 and J6350 Routers
- Replacing External Compact Flashes
- Replacing USB Storage Devices
- Replacing DRAM Modules
- Replacing Power System Components
- Replacing Crypto Accelerator Modules on J2320 and J2350 Routers
- Replacing Crypto Accelerator Modules on J4350 and J6350 Routers
- Replacing Air Filters on J2350 Routers
- Replacing Air Filters on J4350 and J6350 Routers
- Troubleshooting a Services Router
- Contacting Customer Support and Returning Hardware
-
- J Series Requirements and Specifications
- Network Cable Specifications and Connector Pinouts
- Serial PIM Cable Specifications
- Fast Ethernet RJ-45 Connector Pinout
- Gigabit Ethernet uPIM RJ-45 Connector Pinout
- Gigabit Ethernet ePIM RJ-45 Connector Pinout
- Chassis Console Port Pinouts
- E1 and T1 RJ-48 Cable Pinouts
- E3 and T3 BNC Connector Pinout
- ADSL and G.SHDSL RJ-11 Connector Pinout
- ISDN RJ-45 Connector Pinout
-
- Safety and Regulatory Compliance Information
- Definition of Safety Warning Levels
- Safety Guidelines and Warnings
- General Safety Guidelines and Warnings
- Electrical Safety Guidelines and Warnings
- General Electrical
Safety Guidelines
- AC Power Electrical Safety Guidelines
- DC Power Electrical Safety
Guidelines
- Power Sources for Redundant Power Supplies
- DC Power Disconnection
Warning
- DC Power
Grounding Requirements and Warning
- DC Power Wiring Sequence Warning
- DC Power Wiring Terminations Warning
- Grounded Equipment Warning
- Warning Statement for Norway and Sweden
- In Case
of Electrical Accident
- Multiple Power Supplies Disconnection Warning
- Power
Disconnection Warning
- TN Power Warning
- Telecommunication Line Cord Warning
- Installation Safety Guidelines and Warnings
- Laser and LED Safety Guidelines and Warnings
- Maintenance and Operational Safety Guidelines and Warnings
-
- Agency Approvals
- Compliance Statements for Environmental Requirements
- Compliance Statements for EMC Requirements
-
- Index
Symbols
A
- AC plug types
- AC power
- connecting power
- cords See AC power cords
- dedicated AC power feed requirement
- electrical specifications 1, 2
- grounding the router
- installing a J6350 power supply
- J2320 system
- J2350 system
- J4350 system
- J6350 system
- removing a J6350 power supply
- requirements
- safety guidelines
- AC power cords
- accident, steps to take
- ACTIVITY LED (Dual-Port Fast Ethernet PIM)
- adapter, console port
- adapters, for compact flash recovery
- addresses
- ADSL PIM
- ADSL ports
- agency approvals
- air filter
- airflow
- ALARM LED
- description 1, 2
- indications
- alarms
- alternative boot media See boot devices; USB
- altitude requirement
- Annex A; Annex B See ADSL; SHDSL
- antistatic mat
- approvals, agency
- asymmetric digital subscriber line See ADSL
- AT modem command 1, 2
- AT&D1 modem command
- AT&K0 modem command
- AT&W modem command
- ATDT modem command
- ATS0=1 modem command
- AUX port 1, 2
- auxiliary console port 1, 2
B
- backup compact flash, removing
- backup router
- basic connectivity
- battery
- blank panel
- blinking
- Fast Ethernet port ACTIVITY LED state (dual-port PIM)
- Fast Ethernet port link activity LED state (4-port ePIM)
- Gigabit Ethernet port LED
- Gigabit Ethernet port TX/RX LED state 1, 2, 3
- ISDN BRI ONLINE LED state
- POWER LED state 1, 2
- STATUS (router) LED state 1, 2
- boot devices 1, 2
- boot process, backup router for
- boot sequence 1, 2
- braces, in configuration statements
- brackets
- BTUs per hour
- built-in Ethernet ports See Gigabit Ethernet ports
- buttons
- power 1, 2
- RESET CONFIG
C
- cables
- AC power See AC power cords
- ADSL RJ-11 pinouts
- arranging for safety
- chassis console port, DB-9 connector pinouts
- chassis console port, RJ-45 connector pinouts
- connecting to network media
- console port cable (chassis), connecting 1, 2
- console port cable (chassis), replacing
- console port, connecting
- DC cables See DC power cables
- disconnecting PIM cables
- E1 RJ-48 pinouts
- Ethernet cable, connecting 1, 2, 3
- Ethernet rollover, connecting
- Fast Ethernet RJ-45 connector pinout
- Gigabit Ethernet RJ-45 connector pinouts (ePIM)
- Gigabit Ethernet RJ-45 connector pinouts (uPIMs)
- grounding
- ISDN RJ-45 pinouts
- PIM, installing
- PIM, removing
- reducing radio frequency interference (RFI)
- serial EIA-530A DCE pinouts
- serial EIA-530A DTE pinouts
- serial PIM specifications
- serial RS-232 DCE pinouts
- serial RS-232 DTE pinouts
- serial RS-422/449 (EIA-449) DCE pinouts
- serial RS-422/449 (EIA-449) DTE pinouts
- serial V.35 DCE pinouts
- serial V.35 DTE pinouts
- serial X.21 DCE pinouts
- serial X.21 DTE pinouts
- SHDSL RJ-11 pinouts
- T1 RJ-48 pinouts
- Canada, compliance statement
- case number, for JTAC
- channelized E1 PIM
- channelized E1 ports
- channelized T1 PIM
- channelized T1 ports
- chassis
- alarm conditions and remedies 1, 2
- component serial number labels 1, 2
- cover, replacing (J2320 and J2350)
- dimensions 1, 2
- environmental tolerances
- grounding
- heat dissipation
- J2320
- J2350
- J4350
- J6350
- lifting guidelines
- PIM slot numbers 1, 2
- power consumption
- power management, planning
- power management, troubleshooting
- rack requirements
- weight 1, 2
- checklist, for site preparation
- clear operation, RESET CONFIG button
- clear-text access
- clearance
- CLI configuration editor
- comments, in configuration statements
- committed configuration
- compact flash
- backup, replacing
- description 1, 2
- external, description
- external, J2320 and J2350
- external, replacing
- inserting
- internal, recovering
- location (horizontal)
- location (vertical)
- minor (yellow) alarm
- recovering, See also compact flash recovery
- removing
- replacing 1, 2
- replacing, rotating fans warning 1, 2
- compact flash recovery
- compliance
- components
- packing for shipment
- replacing
- serial number label 1, 2
- troubleshooting, See also LEDs
- configuration
- configuration editor See CLI configuration editor; J-Web configuration editor
- connection
- connectivity
- basic See basic connectivity
- hardware
- modem (remote) connection
- through J-Web
- through the CLI locally
- through the CLI remotely
- console port
- adapter
- adapter (chassis) 1, 2
- auxiliary console port 1, 2
- connecting through the CLI locally
- connecting through the CLI remotely
- description 1, 2
- on chassis, DB-9 connector pinouts
- on chassis, RJ-45 connector pinouts
- replacing the cable
- settings for local CLI connection
- settings for modem connection at router for remote CLI access
- settings for modem connection for remote CLI access
- conventions
- cooling system
- airflow requirement
- description 1, 2
- Copper Gigabit Ethernet ePIMs
- Copper Gigabit Ethernet uPIMs
- cords See AC power cords; cables; DC power cables
- cover, replacing (J2320 and J2350)
- Crypto Accelerator Module
- curly braces, in configuration statements
- customer support 1
- Cygwin, for compact flash recovery
D
- datasheets URL
- DB-9 connector pinouts
- DB-9 to DB-25 serial port adapter
- DC power
- cables See DC power cables
- connecting power
- dedicated DC power feed requirement
- electrical specifications 1, 2
- grounding requirements and warning
- grounding the router
- installing a J6350 power supply
- J2320 system
- J2350 system
- J4350 system
- J6350 system
- power disconnection warning
- removing a J6350 power supply
- requirements
- safety guidelines (general)
- safety guidelines, power sources for redundant power supplies
- wiring sequence warning
- wiring terminations warning
- DC power cables
- dd utility, for compact flash recovery
- Declaration of Conformity
- default gateway
- DHCP (Dynamic Host Configuration Protocol)
- DHCP server
- diagnosis
- dial-up modem connection See modem connection to router console port
- digital certificate See SSL certificates
- digital subscriber line See ADSL; SHDSL
- DIMMs (dual inline memory modules) See DRAM modules
- DNS (Domain Name System)
- DNS server
- documentation
- domain name 1, 2, See also DNS server
- Domain Name System
- domain search
- DRAM modules
- dry chemical fire extinguishers, prohibited
- DS1 ports See E1 ports; T1 ports
- DS3 ports See E3 ports; T3 ports
- DSL See ADSL; SHDSL
- dual inline memory modules See DRAM modules
- Dual-Port Channelized T1/E1/ISDN PRI PIM
- Dual-Port E1 PIM
- Dual-Port E3 PIM
- Dual-Port Fast Ethernet PIM
- Dual-Port Serial PIM
- Dual-Port T1 PIM
- Dual-Port T3 PIM
E
- E1 ports
- description, See also channelized E1 ports
- LED states
- RJ-48 cable pinouts
- E3 ports
- earth ground See grounding
- earthquakes
- EIA-530A DCE cable pinouts
- EIA-530A DTE cable pinouts
- electrical specifications
- electricity
- electromagnetic compatibility (EMC) See EMC
- electromagnetic interference (EMI) See See EMI
- electrostatic bag, for storing components
- electrostatic discharge, preventing
- EMC (electromagnetic compatibility)
- EMI (electromagnetic interference)
- encrypted access
- environmental requirements for operation
- ePIMs
- EPROM 1, 2
- ESD (electrostatic discharge), preventing
- ESD wrist strap
- Ethernet cable
- chassis console DB-9 connector pinouts
- chassis console, RJ-45 connector pinouts
- connecting the Services Router to a management device 1, 2
- connecting the Services Router to a modem
- replacing
- Ethernet ports See Fast Ethernet ports See Gigabit Ethernet ports
- Ethernet rollover cable, connecting the router to a management device
- European Union, compliance statement
- external compact flash See compact flash
F
- failures
- compact flash, USB for 1, 2
- PIM, troubleshooting
- Routing Engine fan, troubleshooting
- fans
- description 1, 2, See also air filter See also cooling system
- failure, troubleshooting
- Fast Ethernet ports
- FCC Part 15 compliance statement
- FCC Part 68 compliance statement
- field-replaceable units, replacing
- filter cover See air filter
- filter, air See air filter
- fire extinguishers
- fire safety requirements
- fire suppression
- font conventions
- FPC, PIM slot number in command displays 1, 2
- front panel 1, 2, 3
- FRUs (field-replaceable units), replacing
G
- G.SHDSL PIM
- G.SHDSL ports See SHDSL ports
- gateway, default
- ge-0/0/0
- Gigabit Ethernet ePIMs
- Gigabit Ethernet ports
- Gigabit Ethernet uPIMs
- glossary
- graceful shutdown
- grounding
- grounding lug
- gzip utility, for compact flash recovery
H
- HA (high availability) LED
- hardware
- hardware features
- components
- front panel 1, 2, 3
- PIMs
- product overview
- Hayes-compatible modem See modem connection to router console port
- heat dissipation, PIMs
- high-speed interfaces See ePIMs
- high-speed slots for ePIMs, location
- hostname 1, See also DNS server
- humidity requirement
- Hyperterminal, for terminal emulation
I
- immunity standards
- initial configuration requirements
- injury, steps to take
- installation
- AC power supplies (J6350)
- air filter
- compact flash 1, 2
- console port cable (chassis)
- Crypto Accelerator Module 1, 2
- DC power supplies (J6350)
- DRAM modules
- initial
- PIM cables
- PIMs
- preparation
- requirements
- restricted access, J2350
- restricted access, J4350 and J6350 1, 2, 3, 4
- safety guidelines and warnings
- site checklist
- site guidelines
- USB storage device
- Integrated Services Digital Network See ISDN
- interfaces
- ISDN BRI ports
- ISDN PRI PIM
- ISDN provisioning, See also ISDN BRI ports
J
- J Series
- J-Web configuration editor
- J-Web interface
- configuration editor See J-Web configuration editor
- connecting
- Quick Configuration See Quick Configuration
- J-Web Quick Configuration See Quick Configuration
- J2320
- boot devices
- boot sequence
- chassis
- chassis cover, replacing
- compact flash location
- compact flash, replacing
- cooling system
- electrical specifications
- external compact flash
- fans
- front panel 1, 2
- hardware 1, 2
- installation
- interfaces supported
- mounting brackets
- overview
- physical specifications
- PIMs supported
- ports supported
- power management
- Routing Engine, hardware
- USB port
- J2350
- air filter, replacing
- boot devices
- boot sequence
- chassis
- chassis cover, replacing
- compact flash location
- compact flash, replacing
- cooling system
- electrical specifications
- external compact flash
- fans
- front panel 1, 2
- hardware 1, 2
- installation
- interfaces supported
- mounting brackets
- overview
- physical specifications
- PIMs supported
- ports supported
- power management
- power system
- restricted access installation
- Routing Engine, hardware
- USB port
- J4350
- 4-Port Fast Ethernet ePIM
- 4-Port ISDN BRI S/T PIM
- 4-Port ISDN BRI U PIM
- ADSL PIM
- air filter, replacing
- boot devices
- boot sequence
- chassis
- cooling system
- Dual-Port Channelized T1/E1/ISDN PRI PIM
- Dual-Port E1 PIM
- Dual-Port Fast Ethernet PIM
- Dual-Port Serial PIM
- Dual-Port T1 PIM
- electrical specifications
- fans
- front panel
- FRUs, replacing
- G.SHDSL PIM
- Gigabit Ethernet ePIM
- Gigabit Ethernet uPIMs
- hardware
- hardware components
- hardware, replacing
- installation
- interfaces supported
- mounting brackets, installing
- overview
- physical specifications
- PIM overview
- PIMs supported
- ports supported
- power management
- power system
- restricted access installation 1, 2, 3, 4
- Routing Engine, hardware
- USB port
- J6350
- 4-Port Fast Ethernet ePIM
- 4-Port ISDN BRI S/T PIM
- 4-Port ISDN BRI U PIM
- ADSL PIM
- air filter, replacing
- boot devices 1, 2
- boot sequence
- chassis
- cooling system
- Dual-Port Channelized T1/E1/ISDN PRI PIM
- Dual-Port E1 PIM
- Dual-Port Fast Ethernet PIM
- Dual-Port Serial PIM
- Dual-Port T1 PIM
- E3 PIM
- electrical specifications
- fans
- front panel
- FRUs, replacing
- G.SHDSL PIM
- Gigabit Ethernet ePIM
- Gigabit Ethernet uPIMs
- hardware
- hardware components
- hardware, replacing
- installation
- interfaces supported
- mounting brackets, installing
- overview
- physical specifications
- PIM overview
- PIMs supported
- ports supported
- power management
- power supplies See power supplies, J6350
- restricted access installation 1, 2, 3, 4
- Routing Engine, hardware
- T3 PIM
- USB port
- Japan, compliance statement
- JTAC (Juniper Networks Technical Assistance Center)
- Juniper Networks Technical Assistance Center See JTAC
- JUNOS CLI
- JUNOS Software
- JUNOScript API
L
- labels, serial number 1, 2
- laptop See management device
- lasers
- LEDs
- ACTIVITY status (dual-port PIM)
- ADSL PIM status
- ADSL port status
- ALARM 1, 2
- channelized E1 ports
- channelized T1 ports
- Class 1 product warning
- E1 port status
- E3 port status
- Fast Ethernet port status (4-port ePIM)
- Fast Ethernet port status (dual-port PIM) 1, 2
- G.SHDSL PIM status
- Gigabit Ethernet port status 1, 2, 3
- HA 1, 2
- ISDN PIM status 1, 2
- ISDN port status
- J4350 power supply
- J6350 power supply
- LAN port status 1, 2
- LINK 1, 2, 3
- link activity (4-Port Fast Ethernet ePIM)
- link status (4-port ePIM)
- LINK/ SPEED status (Dual-Port Fast Ethernet PIM)
- ONLINE status (ADSL PIM)
- ONLINE status (G.SHDSL PIM)
- ONLINE status (ISDN BRI PIMs)
- POWER 1, 2
- safety warnings
- serial port status
- SHDSL port status
- STATUS (router) 1, 2
- T1 port status
- T3 port status
- TX/RX 1, 2, 3
- LH transceiver
- lifting guidelines
- lightening activity warning
- limitations
- link activity LED (4-Port Fast Ethernet ePIM)
- LINK LED 1, 2, 3
- link status LED (4-Port Fast Ethernet ePIM)
- LINK/ SPEED LED (Dual-Port Fast Ethernet PIM)
- lithium battery compliance
- lo0.0
- local connection to the router console port
- loopback address
- LX transceiver
M
- maintenance
- AC power cord, replacing
- air filter
- console port cable (chassis)
- Crypto Accelerator Module 1, 2
- DC power cable, replacing
- DRAM modules
- external compact flash
- internal compact flash 1, 2
- PIM cables
- PIMs
- power system
- tools and parts required
- USB storage device
- warnings
- major (red) alarms
- management access
- management device
- connecting through the CLI 1, 2
- connecting to console port
- connecting to J-Web 1, 2
- recovering root password from
- management interface address
- management interfaces
- management ports 1, 2, See also management interface address; management interfaces
- manuals
- memory See compact flash; DRAM modules; USB
- midplane 1, 2
- minor (yellow) alarms
- modem commands
- modem connection to router console port
- monoammonium phosphate
- mounting brackets
- multiple routers
N
- NEBS (Network Equipment Building System)
- identifying NEBS-compliant routers
- shutdown temperature for NEBS-compliant routers 1, 2
- network cable pinouts
- Network Equipment Building System See NEBS
- Network Time Protocol (NTP) server See NTP server
- Norton Ghost utility, for compact flash recovery
- notice icons
- NT1 device, provisioning information
- NTP server
O
P
- packing materials
- parentheses, in syntax descriptions
- password See root password
- passwords
- PC See management device
- personnel warning
- physdiskwrite utility, for compact flash recovery
- PIC See PIMs
- PIM number, always 0
- PIMs (Physical Interface Modules)
- 4-Port Fast Ethernet
- 4-Port ISDN BRI
- ADSL
- cables and connectors
- Dual-Port Channelized T1/E1/ISDN PRI PIM
- Dual-Port E1
- Dual-Port Fast Ethernet
- Dual-Port Serial
- Dual-Port T1
- E3
- failure
- field-replaceable PIMs
- G.SHDSL
- Gigabit Ethernet ePIMs
- Gigabit Ethernet uPIMs
- heat dissipation
- installing
- installing cables
- LEDs See LEDs
- major (red) alarm
- midplane to Routing Engine 1, 2
- non-hot-swappability 1, 2, 3
- offline, troubleshooting
- overview
- PIM number, always 0 1, 2
- power consumption
- power management, planning
- power management, troubleshooting
- removing
- replacing cables
- serial number label
- slot numbering, J2320 and J2350
- slot numbering, J4350 and J6350
- T3
- pinouts
- ADSL RJ-11 connector
- chassis console DB-9 connector
- chassis console port
- EIA-530A DCE serial cable
- EIA-530A DTE serial cable
- Fast Ethernet connector
- Gigabit Ethernet connector (ePIM)
- Gigabit Ethernet connector (uPIMs)
- ISDN RJ-45 connector
- RJ-45 chassis console connector
- RJ-48 connector to DB-15 connector (crossover)
- RJ-48 connector to DB-15 connector (straight)
- RJ-48 connector to RJ-48 connector (crossover)
- RJ-48 connector to RJ-48 connector (straight)
- RS-232 DCE serial cable
- RS-232 DTE serial cable
- RS-422/449 (EIA-449) DCE serial cable
- RS-422/449 (EIA-449) DTE serial cable
- SHDSL RJ-11 connector
- V.35 DCE serial cable
- V.35 DTE serial cable
- X.21 DCE serial cable
- X.21 DTE serial cable
- plug types, AC
- ports
- 0
- ADSL See ADSL ports
- AUX 1, 2
- cables, PIM, installing
- cables, WAN, removing
- channelized See channelized E1 ports; channelized T1 ports
- console (chassis) 1, 2, See also console port
- DS1 See E1 ports; T1 ports
- DS3 See E3 ports; T3 ports
- E1 See E1 ports
- E3 See E3 ports
- G.SHDSL See SHDSL ports
- interface naming
- ISDN See ISDN BRI ports
- J2320 types supported
- J2350 types supported
- J4350 types supported
- J6350 types supported
- lo0.0
- serial See serial ports
- SHDSL See SHDSL ports
- T1 See T1 ports
- T3 See T3 ports
- USB 1, 2
- power
- AC power See AC power
- applying
- button 1, 2
- connecting
- consumption, PIMs
- DC power See DC power
- grounding requirement
- LED 1, 2
- managing
- power cables See DC power cables
- power cords See AC power cords
- power supplies See power supplies
- power system See power system
- removing
- requirements
- troubleshooting
- power button 1, 2
- power cables See DC power cables
- power cords See AC power cords
- POWER LED 1, 2
- power management
- power supplies
- J2320
- J2350
- J4350
- J6350 See power supplies, J6350
- LED states
- power supplies, J6350
- power system
- preparing for installation
- product disposal
- product overview
- provisioning an ISDN line
Q
- Quick Configuration
R
- rack installation
- general requirements
- lifting guidelines
- mounting brackets
- order of multiple routers 1, 2
- procedure 1, 2
- safety guidelines and warnings
- securing rack to building
- size requirements 1, 2
- support for front-mount rack 1, 2
- ventilation requirement 1, 2
- radio frequency interference (RFI), reducing
- ramp angle requirement
- read or write error, Routing Engine
- recovering compact flash See compact flash recovery
- red alarms See major alarms
- redundant J6350 power supplies
- regulatory compliance
- remote connection to router console port
- replacement
- AC power cord
- air filter
- console port cable (chassis)
- Crypto Accelerator Module 1, 2
- DC power cable
- DRAM modules
- external compact flash
- internal compact flash 1, 2
- PIM cables
- PIMs
- power system (J6350)
- tools and parts required
- USB storage device
- request chassis pic fpc-slot command
- reset
- power button for restart 1, 2
- RESET CONFIG button for factory configuration
- RESET CONFIG button
- Return Materials Authorization See RMA
- returning hardware 1
- RJ-45 connector pinouts
- RJ-45 to DB-9 serial port adapter 1
- RJ-48 connector to DB-15 connector (crossover) pinouts
- RJ-48 connector to DB-15 connector (straight) pinouts
- RJ-48 connector to RJ-48 connector (crossover) pinouts
- RJ-48 connector to RJ-48 connector (straight) pinouts
- RMA (Return Materials Authorization) 1
- rollover cable, connecting the console port
- root password
- root password recovery
- router See Services Router
- Routing Engine
- RS-232 DCE cable pinouts
- RS-232 DTE cable pinouts
- RS-422/449 (EIA-449) DCE cable pinouts
- RS-422/449 (EIA-449) DTE cable pinouts
S
- S/T port See ISDN BRI ports
- safety guidelines and warnings
- AC power
- battery handling
- DC power (general)
- DC power disconnection
- DC power wiring sequence warning
- DC power wiring terminations warning
- DC power, grounding requirements and warning
- DC power, redundant power supplies
- electrical
- general
- grounded equipment
- in case of electrical accident
- installation
- jewelry removal
- lasers and LEDs
- levels
- lightening activity
- maintenance and operation
- multiple power supplies
- operating temperature
- power disconnection
- product disposal
- rack-mounting
- ramps
- read installation instructions
- telecommunications cord
- TN power system
- safety standards 1
- sample configuration
- serial number
- chassis components, label 1, 2
- PIMs
- power supply
- serial ports
- service provider, contacting for ISDN provisioning
- Services Router
- backup
- clearance
- connecting
- establishing software connectivity
- grounding a DC-powered model
- grounding an AC-powered model
- hardware replacement
- hardware return
- installation and connection
- network cables and connectors
- operating environment
- overview
- packing for shipment
- PIM overview
- powering on and off
- preparation checklist
- safety and compliance
- site preparation
- unpacking
- Set Up page
- setup
- SFP Gigabit Ethernet ePIMs
- SFP Gigabit Ethernet uPIMs
- SHDSL ports
- shipping carton
- show chassis alarms command
- show chassis fpc pic-status command
- show chassis hardware command
- identifying NEBS-compliant routers
- locating component serial numbers
- verifying Crypto Accelerator Module installation 1, 2
- show chassis power-ratings command
- show chassis routing-engine command
- checking CPU temperature 1, 2
- checking DRAM amount 1, 2
- verifying DRAM installation and configuration
- shutdown
- shutdown temperature
- NEBS-compliant routers 1, 2
- non-NEBS-compliant routers
- signaling limitations
- site preparation
- size
- slot numbers, PIM
- chassis diagram 1, 2
- displayed as FPC number in command output
- small form-factor pluggable transceivers See SFP
- SNMP (Simple Network Management Protocol), no Gigabit Ethernet support 1, 2
- specifications
- SSH
- standards compliance
- startup
- status
- STATUS LEDs
- storage media
- recovering internal compact flash
- replacing the external compact flash
- replacing the internal compact flash 1, 2
- replacing the USB storage device
- support, technical See technical support
- SX transceiver
- symmetric high-speed digital subscriber line See SHDSL
- syntax conventions
- system time
T
- T1 ports
- description, See also channelized T1 ports
- LED states
- RJ-48 cable pinouts
- T3 ports
- technical support
- telecommunications line wire gauge
- Telnet
- temperature
- required for operation
- Routing Engine, too warm
- shutdown, NEBS-compliant routers 1, 2
- shutdown, non-NEBS-compliant routers
- warning
- temperature alarm, air filter replacement for
- terminology
- thermal output
- time See system time
- time zone 1
- TN power system
- tolerances, environmental
- tools and equipment
- troubleshooting
- troubleshooting a Services Router, hardware components
- turning on a Services Router
- TX/RX LED 1, 2, 3
- Type C fire extinguishers
U
- U port See ISDN BRI ports
- United States, compliance statements
- universal serial bus See USB
- unpacking the router
- uPIMs, Gigabit Ethernet See Gigabit Ethernet uPIMs
- URLs
- USB (universal serial bus)
- utilities, for compact flash recovery
V
W
- warnings
- battery handling
- DC power cables
- DC power disconnection
- DC power plant and chassis ground
- DC wiring sequence
- DC wiring terminations
- DC-powered J4350 and J6350 routers, restricted access installation only
- earthed mains socket (Norway and Sweden only)
- electrical
- ESD strap to prevent router damage
- follow lifting guidelines 1, 2
- general
- grounded equipment
- installation
- jewelry removal
- laser and LED
- levels defined
- lightening activity
- maintenance and operational
- multiple power supply disconnection
- operating temperature
- personnel
- power disconnection
- product disposal
- rack-mounting requirements
- ramp angle
- read installation instructions
- restricted access location for DC-powered routers 1, 2, 3, 4, 5
- rotating fans, compact flash replacement 1, 2
- safe rack order for multiple routers 1, 2
- telecommunications lines
- TN power system
- weight
- WinZip utility, for compact flash recovery
- wire gauge
- wiring guidelines
X
