[ Contents] [ Prev] [ Next] [ Report an Error]

Connect the JCS 1200 AC Platform to AC Power

The JCS 1200 platform has four AC power C20 input connectors. Use two C20/C19 type AC jumper cords to connect AC power to the JCS 1200 platform.

To supply power to the JCS 1200 platform:

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis. For more information about ESD, see the JCS 1200 Platform Hardware Guide.
  2. Connect one end of each power cord to a power connector on the rear of the JCS 1200 platform.
  3. Connect the other end of each power cord to a 200-240 volt, 20-amp power distribution unit or appropriate electrical outlet. An external surge protective device (SPD) is not required at the AC power input of the JCS 1200 platform.

[ Contents] [ Prev] [ Next] [ Report an Error]