[ Contents] [ Prev] [ Next] [ Report an Error]

Configure the JCS 1200 Routing Engines

To achieve Routing Engine redundancy, you must configure the Ethernet controllers in one or more Routing Engines for failover. When failover occurs on a Routing Engine, the secondary Ethernet controller takes over network communications, using the JCS 1200 switch module that is associated with that controller. Install a pair of JCS 1200 switch modules in switch module bays 1 and 2, and then configure them and your network infrastructure so that they can direct traffic to the same destinations. For information about configuring the Routing Engines, see the JUNOS Protected System Domain Configuration Guide.


[ Contents] [ Prev] [ Next] [ Report an Error]