[ Contents] [ Prev] [ Next] [ Report an Error]

GE 1000Base-SX Module Combination (1 Port) (128 MB)

This module combination is no longer supported because the line module has reached end-of-life. However, the I/O module is still supported.

Line module label GE/FE

I/O module label GE I/O SFP

Number of I/O ports

1 active, 1 redundant

Software release

First supported: 2.0.0

Final supported: 5.2.x

Description

130 W

Gigabit Ethernet

The GE SFP I/O module uses a range of small form-factor pluggable (SFP) transceivers to support different modes and cable lengths.

The transceivers on this GE I/O module are 1000Base-SX compliant.

Type

ASIC

Capability

Ethernet (IEEE 802.3z)

1000Base-SX

Software features

See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.

Model compatibility

ERX-7xx models

ERX-14xx models

ERX-310 router

SRP module compatibility

SRP-5G+

SRP-10G

SRP-40G

SRP-40G PLUS

SRP-SE10G

Module redundancy support

Not applicable

Cables and connectors

LC full duplex

Tx power:

min: –9.5 dBm

max: –4 dBm

Center wavelength: 850 nm

Rx input power:

min: –17 dBm

max: –3 dBm

Rated for 275 m (300 yards) over 62.5-micron core cable

Rated for 550 m (601 yards) over 50-micron core cable

See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.

LEDs

See ERX Module Guide, Appendix B, Module LEDs.

Alarms, errors, and events

See Monitoring Ethernet Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 6, Configuring Ethernet Interfaces.

[ Contents] [ Prev] [ Next] [ Report an Error]

Line module label	GE/FE
I/O module label	GE I/O SFP
Number of I/O ports	1 active, 1 redundant
Software release	First supported: 2.0.0 Final supported: 5.2.x
Description	130 W Gigabit Ethernet The GE SFP I/O module uses a range of small form-factor pluggable (SFP) transceivers to support different modes and cable lengths. The transceivers on this GE I/O module are 1000Base-SX compliant.
Type	ASIC
Capability	Ethernet (IEEE 802.3z) 1000Base-SX
Software features	See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX-7xx models ERX-14xx models ERX-310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	Not applicable
Cables and connectors	LC full duplex Tx power: min: –9.5 dBm max: –4 dBm Center wavelength: 850 nm Rx input power: min: –17 dBm max: –3 dBm Rated for 275 m (300 yards) over 62.5-micron core cable Rated for 550 m (601 yards) over 50-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events	See Monitoring Ethernet Interfaces in JUNOSe Physical Layer Configuration Guide, Chapter 6, Configuring Ethernet Interfaces.