[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Replacing an NVS Card

To replace an NVS card on an SRP module:

  1. Obtain an antistatic container for the NVS card you plan to remove. (See Storing Modules and Components.)
  2. With a small flathead screwdriver, remove the faceplate from the NVS card slot on the SRP module. (See Figure 37.)
  3. Use the screwdriver to depress the release button next to the NVS card. (See Figure 37.)

    This action releases the NVS card.

    Figure 37: NVS Card Slot on SRP Module

    Image g013763.gif

  4. Remove the NVS card and place it in the antistatic container.
  5. Insert the new NVS card into the slot, and push it until it clicks into place.
  6. Replace the faceplate on the NVS card slot.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]