[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

List of Technical Publications

The E-series and JUNOSe documentation set consists of several hardware and software guides, which are available in electronic and printed formats.

Table 3 lists and describes the E-series and JUNOSe document set. For a complete list of abbreviations used in this document set, along with their spelled-out terms, see JUNOSe System Basics Configuration Guide, Appendix A, Abbreviations and Acronyms.

Table 3: Juniper Networks E-series and JUNOSe Technical Publications

Document

Description

E-series Hardware Documentation

E320 Quick Start Guide

Shipped in the box with all new E320 routers. Provides the basic procedures to help you get an E320 router up and running quickly.

E320 Hardware Guide

Provides the necessary procedures for getting the E320 router operational, including information about:

  • Installing the chassis and modules
  • Connecting cables
  • Powering up the router
  • Configuring the router for management access
  • Troubleshooting common issues

Describes switch route processor (SRP) modules, line modules, and I/O adapters (IOAs) available for the E320 router.

E320 Module Guide

Provides detailed specifications for line modules and IOAs in E320 routers, and information about the compatibility of these modules with JUNOSe software releases.

Lists the layer 2 protocols, layer 3 protocols, and applications that line modules and their corresponding IOAs support.

Provides module LED information.

E-series Installation Quick Start poster or ERX Quick Start Guide

Shipped in the box with all new ERX routers. Provides the basic procedures to help you get an ERX router up and running quickly.

ERX Hardware Guide

Provides the necessary procedures for getting ERX-14xx models, ERX-7xx models, and ERX-310 routers operational, including information about:

  • Installing the chassis and modules
  • Connecting cables
  • Powering up the router
  • Configuring the router for management access
  • Troubleshooting common issues

Describes switch router processor (SRP) modules, line modules, and I/O modules available for the ERX routers.

ERX Module Guide

Provides detailed specifications for line modules and I/O modules in ERX-14xx models, ERX-7xx models, and ERX-310 routers, and information about the compatibility of these modules with JUNOSe software releases.

Lists the layer 2 protocols, layer 3 protocols, and applications that line modules and their corresponding I/O modules support.

Provides module LED information.

ERX End-of-Life Module Guide

Provides an overview and description of ERX modules that are end-of-life (EOL) and can no longer be ordered for the following routers:

  • ERX-7xx models
  • ERX-14xx models
  • ER-310 router
JUNOSe Software Guides

JUNOSe System Basics Configuration Guide

Provides information about:

  • Planning and configuring your network
  • Using the command-line interface (CLI)
  • Installing JUNOSe software
  • Configuring the Simple Network Management Protocol (SNMP)
  • Managing the router and its modules, including the use of high availability (HA) for SRP redundancy
  • Configuring passwords and security
  • Configuring the router clock
  • Configuring virtual routers

JUNOSe Physical Layer Configuration Guide

Explains how to configure, test, and monitor physical layer interfaces.

JUNOSe Link Layer Configuration Guide

Explains how to configure and monitor static and dynamic link layer interfaces.

JUNOSe IP, IPv6, and IGP Configuration Guide

Explains how to configure and monitor IP, IPv6 and Neighbor Discovery, and interior gateway protocols (RIP, OSPF, and IS-IS).

JUNOSe IP Services Configuration Guide

Explains how to configure and monitor IP routing services. Topics include:

  • Routing policies
  • Firewalls
  • Network Address Translation (NAT)
  • J-Flow statistics
  • Bidirectional forwarding detection (BFD)
  • Internet Protocol Security (IPSec)
  • Digital certificates
  • IP tunnels
  • Layer 2 services over GRE and over MPLS
  • Virtual Router Redundancy Protocol (VRRP)

JUNOSe Multicast Routing Configuration Guide

Explains how to configure and monitor IP multicast routing and IPv6 multicast routing. Topics include:

  • Internet Group Management Protocol (IGMP)
  • Layer 2 Control (L2C)
  • Protocol Independent Multicast (PIM)
  • Distance Vector Multicast Routing Protocol (DVMRP)
  • Multicast Listener Discovery (MLD)

JUNOSe BGP and MPLS Configuration Guide

Explains how to configure and monitor Border Gateway Protocol (BGP) routing, Multiprotocol Label Switching (MPLS), and related applications, and configure and monitor the Virtual Private LAN Service (VPLS).

JUNOSe Policy Management Configuration Guide

Explains how to configure, manage, and monitor customized policy rules for packet classification, forwarding, filtering, and flow rates. Also describes the packet mirroring feature, which uses secure policies.

JUNOSe Quality of Service Configuration Guide

Explains how to configure quality of service (QoS) features to queue, schedule, and monitor traffic flow. These features include:

  • Traffic classes and traffic-class groups
  • Drop, queue, QoS, and scheduler profiles
  • QoS parameters
  • Statistics

JUNOSe Broadband Access Configuration Guide

Explains how to configure and monitor a remote access environment, which can include the following features:

  • Authentication, authorization, and accounting (AAA)
  • Dynamic Host Configuration Protocol (DHCP)
  • Remote Authentication Dial-In User Service (RADIUS)
  • Terminal Access Controller Access Control System (TACACS+)
  • Layer 2 Tunneling Protocol (L2TP)
  • Subscriber management

JUNOSe System Event Logging Reference Guide

Describes the JUNOSe system logging feature and describes how to use the CLI to monitor your system's log configuration and system events.

JUNOSe Command Reference Guide A to M

JUNOSe Command Reference Guide N to Z

Together constitute the JUNOSe Command Reference Guide. Contain important information about commands implemented in the system software. Use to look up:

  • Descriptions of commands and command parameters
  • Command syntax
  • A command's related mode
  • Starting with JUNOSe Release 7.1.0, a history of when a command, its keywords, and its variables were introduced or added

Use with the JUNOSe configuration guides.

JUNOSe Comprehensive Index

Provides a complete index of the JUNOSe software documentation set.

Release Notes  

JUNOSe Release Notes

Provide the latest information about features, changes, known problems, resolved problems, and system maximum values. If the information in the Release Notes differs from the information found in the documentation set, follow the Release Notes.

Release notes are included on the corresponding software CD and are available on the Web.

Obtaining Documentation

To obtain the most current version of all Juniper Networks technical documentation, see the products documentation page on the Juniper Networks Web site at https://www.juniper.net/.

To order printed copies of this guide and other Juniper Networks technical documents, or to order a documentation CD, which contains this guide, contact your sales representative.

Copies of the Management Information Bases (MIBs) available in a software release are included on the documentation CDs and at https://www.juniper.net/.


[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]