[an error occurred while processing this directive] E320 8.0.x Hardware Guide

Techpubs Home
Report an Error

Collapse TOC

Entire manual as PDF

About This Guide
Documentation Conventions
List of Technical Publications
Obtaining Documentation
Documentation Feedback
Requesting Support
E320 Overview
System Description
Chassis Overview
E320 Modules
SRP Module
Module Details
Nonvolatile Storage
SFM Module
Fabric Slices
Module Details
Line Modules
Packet Classification
I/O Adapters
Network Management Tools
CLI Management
SNMP MIB Management
Redundancy Features
SRP Modules
NVS Cards
Unpacking and Inspecting the Router
Before You Begin
Unpacking the Router
Inspecting Router Components and Accessories
If You Detect or Suspect Damage
Contacting Juniper Networks
The Next Step
Installing the Router
Before You Begin
Freestanding Installation
Rack-Mounted Installation
Installation Guidelines
Preparing the Equipment Racks
Installing the Router
The Next Step
Installing Modules
Slot Numbering
IOA Slot Combinations
IOAs Requiring SFPs
ES2 10G Uplink Line Modules
Managing Modules Using the Software
Order of Installation
Hot-Swapping Modules
Protecting Modules and Slots
Required Tools and Safety Items
Safety Guidelines
Installing an SRP Module or SFM Module
Installing an IOA Shelf
Installing a Line Module or an IOA
Removing Modules and IOAs
Installing and Removing SFPs
Installing SFPs
Removing SFPs
The Next Step
Cabling the Router
Cabling Overview
Required Tools, Wires, and Cables
Cabling the SRP IOA
Network Timing Ports
Management Ports
Connecting to the Network
Connecting to a Console Terminal
Cabling IOAs
LC Duplex Connectors
Cabling the Router for Power
Task 1: Turn Off All Router Power
Task 2: Connect the Grounding Cables
Task 3: Connect the Power Cables
The Next Step
Powering Up the Router
Before You Power Up the System
Powering Up
Initialization Sequence
Status LEDs
Powering Down
The Next Step
Accessing E-series Routers
Setting Up Management Access
Console Port Setup
Using HyperTerminal
Connecting Directly to the Router
Assigning an IP Address
Telnet Setup
The Next Step
Maintaining the Router
Required Tools and Items
Storing Modules and Components
Cleaning the System
Upgrading NVS Cards on SRP Modules
Upgrading a System That Contains One SRP Module
Upgrading a System That Contains Two SRP Modules
Replacing an NVS Card
Replacing Fan Trays
Removing the Fan Tray
Installing the Fan Tray
Diagnosing Problems
Initialization Sequence
Troubleshooting Power Failures
Understanding Status LEDs to Troubleshoot
LED Identification
LED Activity
Monitoring Temperatures of Modules
Resetting Line Modules and SRP Modules
Double-Bit Errors on SRP Modules
Detecting Double-Bit Errors
Fixing Double-Bit Errors
System Specifications
E320 Router Specifications
Installation Guidelines and Requirements
Your Preinstallation Responsibilities
Environmental Requirements
Regulatory Compliances
Safety Guidelines
Equipment Rack Requirements
Mechanical Requirements
Space Requirements
Proper Rack Installation
Cabling Recommendations
Product Reclamation and Recycling Program
Hardware Compliance
Federal Communications Commission (FCC) Statement
FCC Requirements for Consumer Products
Food and Drug Administration, Center for Devices and Radiological Health
Canadian Department of Communications Radio Interference Regulations
Réglement sur le brouillage radioélectrique du ministère des communications
Industry Canada Notice CS-03
Avis CS-03 d'Industrie Canada
D.O.C. Explanatory Notes: Equipment Attachment Limitations
Notes explicatives du ministère des Communications: limites visant les accessoires
EC Declaration of Conformity
Voluntary Control Council for Interference (VCCI) Statement for Japan
Cable Pinouts
Contacting Customer Support and Returning Hardware
Contacting Customer Support
Return Procedure
Locating Component Serial Numbers
Information You Might Need to Supply to JTAC
Tools and Parts Required
Returning Products for Repair or Replacement
Packing Instructions for Returning a Chassis
Declaration of Conformity

[an error occurred while processing this directive]