[ Contents] [ Prev] [ Next] [ Report an Error]

SFM-100 Module

Module label SFM-100
IOA label
  • Not applicable
Number of IOA ports
  • Not applicable
Software release
  • First supported: 7.0.1
Description
  • 40 W
  • Switch fabric module (100 Gbps)
  • Works with the SRP-100 module to create a switch fabric
  • Must be installed only with SRP-100 module and SFM–100 modules
Capability
  • Not applicable
Software features
  • Not applicable
Line module compatibility
  • ES2 4G LM
  • ES2 10G UPLINK LM
SRP module compatibility
  • SRP-100
  • Cannot use with SRP-320 module or SFM-320 module
Module redundancy support
  • N+1 redundancy
Port redundancy support
  • Not applicable
Cables and connectors
  • Not applicable
LEDs When lit, LED indicates:
  • OK (green)—Self-test passed
  • FAIL (red)—Failure detected
  • ONLINE (green)—Online with no alarms or errors
  • REDUN (green)—N+1 redundancy is enabled; 2 SRPs and 3 SFMs must be installed and working. When LED is unlit, one of the five fabric slices is down or not installed; N+1 redundancy is not enabled.

Note: When REDUN LED is on, the module may be removed without interrupting service.

Alarms, errors, and events
  • See Monitoring Modules in JUNOSe System Basics Configuration Guide, Chapter 6, Managing Modules.

[ Contents] [ Prev] [ Next] [ Report an Error]