[ Contents] [ Prev] [ Next] [ Report an Error]

SRP IOA

Module label SRP IOA
IOA label
  • Not applicable
Number of IOA ports
  • 3
Software release
  • First supported: 7.0.1
Description
  • 10 W
  • Pairs with SRP module
  • Interfaces with the SRP modules through the system's midplane.
Capability
  • Ethernet (IEEE 802.3)
  • 10/100Base-T
  • RS-232
  • Auxiliary port allows access to debug ports on a specific processor (SRP module, LM)
Software features
  • Not applicable
Line module compatibility
  • Not applicable
SRP module compatibility
  • SRP-100
  • SRP-320
Port redundancy support
  • Not applicable
Cables and connectors
  • Terminal blocks
  • Two dual-purpose BNC connectors (primary and secondary) for BITS timing clock sources (E1 or T1); 75–ohm E1 2.048–Mbps/T1 1.544–Mbps inputs terminating with a 120/75 ohm or 100/75 ohm balun
  • One 10/100Base-T Ethernet management port with an RJ-45 connector
  • Two RS-232 ports with DB-9 connectors for direct command line interface (CLI) and debug access
  • See E320 Hardware Guide, Chapter 5, Cabling the Router for more information.
LEDs
  • None
Alarms, errors, and events
  • See Monitoring Modules in JUNOSe System Basics Configuration Guide, Chapter 6, Managing Modules.

[ Contents] [ Prev] [ Next] [ Report an Error]