SRP-10G Module Combination (1-GB Memory)

Line module label SRP-10G
I/O module label SRP I/O
Number of I/O ports
7
Software release
First supported: 4.1.3 or later 4.1.x release, 5.0.4 or later 5.0.x release, 5.1.2 or higher-numbered release, 5.2.0
Final supported: 8.0.x
Description
125 W
Switch route processor (10 Gbps)
Has a minimum of 1 GB of error checking and correction (ECC) memory with a 1-GB nonvolatile storage (NVS) card.
Type
Not applicable
Capability
Ethernet (IEEE 802.3)
10/100Base-T
RS-232
Software features
Not applicable
Model compatibility
ERX710 router
ERX1410 router
SRP module compatibility
SRP-10G
Module redundancy support
1:1 redundancy
Cables and connectors
Terminal blocks
BNC, 75–ohm
Wire wrap posts
RJ-45
RS-232 (DB-9)
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs
See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events
See Monitoring Modules in JunosE System Basics Configuration Guide, Chapter 6, Managing Modules.

Line module label	SRP-10G
I/O module label	SRP I/O
Number of I/O ports	7
Software release	First supported: 4.1.3 or later 4.1.x release, 5.0.4 or later 5.0.x release, 5.1.2 or higher-numbered release, 5.2.0 Final supported: 8.0.x
Description	125 W Switch route processor (10 Gbps) Has a minimum of 1 GB of error checking and correction (ECC) memory with a 1-GB nonvolatile storage (NVS) card.
Type	Not applicable
Capability	Ethernet (IEEE 802.3) 10/100Base-T RS-232
Software features	Not applicable
Model compatibility	ERX710 router ERX1410 router
SRP module compatibility	SRP-10G
Module redundancy support	1:1 redundancy
Cables and connectors	Terminal blocks BNC, 75–ohm Wire wrap posts RJ-45 RS-232 (DB-9) See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events	See Monitoring Modules in JunosE System Basics Configuration Guide, Chapter 6, Managing Modules.