OC3/STM1 ATM Multimode With APS/MSP Redundancy Module Combination

Line module label OCx/STMx ATM or OCx/STMx /DS3-ATM
I/O module label 4XOC3
APS I/O
MULTI MODE
Number of I/O ports
4 active, 4 redundant
Software release
First supported release: 5.1.2, 5.2.0 (APS/MSP)
Final supported (release or date): 2017-01-31
The OCx/STMx ATM line module or the OCx/STMx /DS3-ATM line module must have a minimum of 256 MB of memory to be used with JunosE Release 5.3.0 or a higher-numbered release.
Description
130 W
Can use either the 128-MB OCx/STMx ATM line module or the 256-MB OCx/STMx /DS3-ATM line module.
Unchannelized, concatenated OC3/STM1 for ATM
Type
EFA ASIC
Capability
OC3/STM-1
ATM/AAL5
Software features
See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility
ERX7xx models
ERX14xx models
ERX310 router
SRP module compatibility
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
Module redundancy support
1:N redundancy
NOTE: Line module redundancy is not supported on the ERX310 router.
Cables and connectors
LC full duplex
Tx power:
min: –19 dBm
max: –14 dBm
Center wavelength: 1310 nm
Rx input power:
min: –30 dBm
max: –14 dBm
Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs
See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events
See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces.

Line module label	OCx/STMx ATM or OCx/STMx /DS3-ATM
I/O module label	4XOC3 APS I/O MULTI MODE
Number of I/O ports	4 active, 4 redundant
Software release	First supported release: 5.1.2, 5.2.0 (APS/MSP) Final supported (release or date): 2017-01-31 The OCx/STMx ATM line module or the OCx/STMx /DS3-ATM line module must have a minimum of 256 MB of memory to be used with JunosE Release 5.3.0 or a higher-numbered release.
Description	130 W Can use either the 128-MB OCx/STMx ATM line module or the 256-MB OCx/STMx /DS3-ATM line module. Unchannelized, concatenated OC3/STM1 for ATM
Type	EFA ASIC
Capability	OC3/STM-1 ATM/AAL5
Software features	See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX7xx models ERX14xx models ERX310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	1:N redundancy NOTE: Line module redundancy is not supported on the ERX310 router.
Cables and connectors	LC full duplex Tx power: min: –19 dBm max: –14 dBm Center wavelength: 1310 nm Rx input power: min: –30 dBm max: –14 dBm Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events	See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces.