cOC12/STM4 Multimode Without APS/MSP Redundancy Module Combination

Line module label cOCx/STMx F0
I/O module label cOC12 STM4 F0 I/O
MULTI MODE
Number of I/O ports
1
Software release
First supported: 2.2.0
Final supported: 15.0.x
Description
130 W
OC12/STM4 channelized to DS3, DS1, E1, and DS0
Type
EFA ASIC
Capability
OC12/STM4
OC3/STM1
DS3, DS1
T1, E1
DS0
HDLC framing
Software features
See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility
ERX7xx models
ERX14xx models
ERX310 router
SRP module compatibility
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
Module redundancy support
1:N redundancy
NOTE: Line module redundancy is not supported on the ERX310 router.
Cables and connectors
SC full duplex connector
Tx power:
min: –19 dBm
max: –14 dBm
Center wavelength: 1310 nm
Rx input power:
min: –30 dBm
max: –14 dBm
Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs
See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events
See Monitoring Interfaces in JunosE Physical Layer Configuration Guide, Chapter 4, Configuring Channelized OCx/STMx Interfaces.

Line module label	cOCx/STMx F0
I/O module label	cOC12 STM4 F0 I/O MULTI MODE
Number of I/O ports	1
Software release	First supported: 2.2.0 Final supported: 15.0.x
Description	130 W OC12/STM4 channelized to DS3, DS1, E1, and DS0
Type	EFA ASIC
Capability	OC12/STM4 OC3/STM1 DS3, DS1 T1, E1 DS0 HDLC framing
Software features	See ERX Module Guide, Appendix A, Module Protocol Support for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX7xx models ERX14xx models ERX310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	1:N redundancy NOTE: Line module redundancy is not supported on the ERX310 router.
Cables and connectors	SC full duplex connector Tx power: min: –19 dBm max: –14 dBm Center wavelength: 1310 nm Rx input power: min: –30 dBm max: –14 dBm Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See ERX Module Guide, Appendix B, Module LEDs.
Alarms, errors, and events	See Monitoring Interfaces in JunosE Physical Layer Configuration Guide, Chapter 4, Configuring Channelized OCx/STMx Interfaces.