GE Single-Mode Module Combination (1 Port)

Line module label GE/FE
I/O module label GE I/O
SINGLE MODE
Number of I/O ports
1 active, 1 redundant
Software release
First supported: 2.0.0
Final supported: Not applicable
Description
130 W
Gigabit Ethernet
This module combination has been superseded by a newer assembly; however, it is supported by current software.
Type
EFA ASIC
Capability
Ethernet (IEEE 802.3z)
Software features
See Ethernet Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility
ERX7xx models
ERX14xx models
ERX310 router
SRP module compatibility
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
Module redundancy support
Not applicable
Cables and connectors
SC full duplex
Tx power:
min: –11 dBm
max: –3 dBm
Center wavelength: 1300 nm
Rx input power:
min: –20 dBm
max: –3 dBm
Rated for 550 m (601 yards) over 62.5-micron core or 50-micron core MM fiber
Rated for 5 km (3.1 miles) over 10-micron core cable
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs
See Module LEDs.
Alarms, errors, and events
See Monitoring Ethernet Interfaces in JunosE Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces.

Line module label	GE/FE
I/O module label	GE I/O SINGLE MODE
Number of I/O ports	1 active, 1 redundant
Software release	First supported: 2.0.0 Final supported: Not applicable
Description	130 W Gigabit Ethernet This module combination has been superseded by a newer assembly; however, it is supported by current software.
Type	EFA ASIC
Capability	Ethernet (IEEE 802.3z)
Software features	See Ethernet Modules for information about the layer 2 and layer 3 protocols and applications that this module combination supports.
Model compatibility	ERX7xx models ERX14xx models ERX310 router
SRP module compatibility	SRP-5G+ SRP-10G SRP-40G SRP-40G PLUS SRP-SE10G
Module redundancy support	Not applicable
Cables and connectors	SC full duplex Tx power: min: –11 dBm max: –3 dBm Center wavelength: 1300 nm Rx input power: min: –20 dBm max: –3 dBm Rated for 550 m (601 yards) over 62.5-micron core or 50-micron core MM fiber Rated for 5 km (3.1 miles) over 10-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
LEDs	See Module LEDs.
Alarms, errors, and events	See Monitoring Ethernet Interfaces in JunosE Physical Layer Configuration Guide, Chapter 5, Configuring Ethernet Interfaces.