LM-10 ADV Line Module

Module labelES2 10G ADV LM
Number of ports
  • Not applicable
Software release
  • First supported: 10.1.0
  • 190 W maximum
  • Acts as frame forwarding engines for the physical interfaces
  • Processes up to 10 GB of data traffic
  • Pairs with ES2–S2 10GE PR IOA, ES2-S1 REDUND IOA, ES2–S3 GE-20 IOA, ES2–S1 GE-8 IOA, and ES2-S1 Service IOA
  • In an SRP-120 and SRP-320 configuration, it can be installed in any slot
  • Supports a line rate of 128–byte frames on IOAs
  • The 120–Gbps and 320–Gbps switch fabrics allocate 10 Gbps of overall bandwidth to each line module slot.
  • See JunosE System Basics Configuration Guide, Chapter 6, Managing Modules for more information.
Software features
  • Not applicable
Line module compatibility
  • Not applicable
SRP module compatibility
  • SRP-120
  • SRP-320
Line module redundancy compatibility
  • Yes (Redundancy IOA must be installed in either slot 0 or slot 11)
  • Can back up another ES2 10G ADV LM or ES2 10G LM
  • Shared tunnel server on the ES2 10G ADV LM supports line module redundancy.
Port redundancy support
  • Not applicable
Cables and connectors
  • Not applicable
LEDsWhen lit, LED indicates:
  • OK (green)—Self-test passed
  • FAIL (red)—Failure detected
  • ONLINE (green)—Online with no alarms or errors
  • REDUN (green)—Redundant card available
Alarms, errors, and events
  • See Monitoring Modules in JunosE System Basics Configuration Guide, Chapter 6, Managing Modules.