Contents
- About This Guide
- E-Series Routers
- Audience
- Conventions
- Documentation
- MIBS
- Release Notes
- Abbreviations
- Web Access
- Comments About the Documentation
- Contacting Customer Support
Installing and Using E-Series Routers
- E-Series Overview
- Overview
- Where E-Series Routers Fit In
- E-Series Routers
- ERX-14xx Models
- ERX-7xx Models
- ERX-310 Router
- E-Series Modules
- SRP Module
- Module Details
- SRP Module Redundancy
- Nonvolatile Storage
- SRP I/O Module
- Module Details
- Line Modules
- Packet Classification
- I/O Modules
- Network Management Tools
- CLI Management
- SNMP MIB Management
- NMC-RX Device Management System
- Redundancy Features
- SRP Modules
- NVS Cards
- Line Modules
- Power
- Fans
- Unpacking and Inspecting E-Series Routers
- Before You Begin
- Unpacking ERX-14xx Models
- Unpacking ERX-7xx Models and ERX-310 Routers
- Inspecting E-Series Router Components and Accessories
- If You Detect or Suspect Damage
- Contacting Juniper Networks
- The Next Step
- Installation Guidelines and Requirements
- Your Preinstallation Responsibilities
- Environmental Requirements
- Regulatory Compliances
- Safety Guidelines
- ERX-310 Power Cord Warnings (AC Model)
- Equipment Rack Requirements
- Mechanical Requirements
- Space Requirements
- Proper Rack Installation
- Cabling Recommendations
- Installing E-Series Routers
- Before You Begin
- Freestanding Installation
- Rack-Mounted Installation
- Installation Guidelines
- Safety Guidelines
- Preparing the Equipment Racks
- Installing the Router
- The Next Step
- Installing Modules
- Overview
- Slot Groups
- Slot Groups for the ERX-1410 Router
- Slot Groups for the ERX-7xx Models
- Combinations of Line Modules
- OC48 Line Modules
- Replacing and Managing Modules Using the Software
- Hot-Swapping Modules
- Protecting Modules and Slots
- Order of Installation
- Required Tools and Safety Items
- Safety Guidelines
- Installing SRP I/O and SRP Modules
- Installing an SRP I/O Module
- Installing an SRP Module
- Installing Line and I/O Modules
- Installing a Line Module or an I/O Module
- Removing a Module
- Installing Components for Line Module Redundancy
- Installing the Line Modules
- Installing the Redundancy Midplane
- Installing the I/O Modules
- Verifying the Installation
- Configuring Line Module Redundancy
- The Next Step
- Cabling E-Series Routers
- Cabling Overview
- Required Tools, Wires, and Cables
- Cabling the SRP I/O Module
- External Timing Ports
- Console Ports
- Connecting to the Network
- Connecting to a Console Terminal
- Cabling the E-Series Router for Power
- Task 1: Turn Off All E-Series Router Power
- Task 2: Connect the Grounding Cables
- Task 3: Connect the Power Cables
- ERX-7xx models, ERX-14xx models, ERX-310 router (DC model)
- ERX-310 router (AC model)
- Cabling I/O Modules
- BNC Connectors
- HSSI Connectors
- RJ-45 Connectors
- RJ-48C Connectors
- LC Duplex Connectors
- SC Duplex Connectors
- SMB Connectors
- Cabling X.21/V.35 Connectors
- Redundant Ports
- The Next Step
- Powering Up E-Series Routers
- Before You Power Up the System
- Powering Up
- Initialization Sequence
- Status LEDs
- Powering Down
- The Next Step
- Accessing E-Series Routers
- Setting Up Management Access
- Console Port Setup
- Using HyperTerminal
- Connecting Directly to the E-Series Router
- Assigning an IP Address
- Telnet Setup
- SNMP
- The Next Step
- Maintaining E-Series Routers
- Required Tools and Items
- Storing Modules and Components
- Cleaning the System
- Upgrading NVS Cards on SRP Modules
- Upgrading a System That Contains One SRP Module
- Upgrading a System That Contains Two SRP Modules
- Replacing an NVS Card
- Upgrading Memory on SRP Modules
- Checking the Memory Installed
- Removing SODIMMs
- Adding New SODIMMs
- Verifying the Upgrade
- Replacing SFPs on GE I/O Modules
- Removing SFPs
- Installing SFPs
- Verifying the Installation
- Replacing Fan Trays
- Removing the Fan Tray
- Installing the Fan Tray
- Installing a Cable-Management Bracket on ERX-7xx Models
- Troubleshooting
- Diagnosing Problems
- Initialization Sequence
- Troubleshooting Power Failures
- Understanding Status LEDs to Troubleshoot
- LED Activity During Booting
- LED Identification
- LED Activity During Booting
- Abnormal LED Activity
- Redundancy Status
- Monitoring Temperatures of Modules
- Resetting Line Modules and SRP Modules
- Double-Bit Errors on SRP Modules
- Detecting Double-Bit Errors
- Fixing Double-Bit Errors
System and Module Specifications
- System Specifications
- ERX-14xx Models Specifications
- ERX-7xx Models Specifications
- ERX-310 Router Specifications
- Module Specifications
- Module Functionality
- Module Specifications
- I/O Module Specifications
- Cable Lengths for X.21/V.35 Cables
- Protocol Support
- Channelized OCx/STMx Modules
- Channelized T1 and E1 Modules
- Channelized T3 Modules
- Ethernet Modules
- HSSI Modules
- OCx/STMx ATM Modules
- OCx/STMx POS and OC48 Modules
- Tunnel Service Modules
- Unchannelized E3 Modules
- Unchannelized T3 Modules
- X.21/V.35 Modules
- Cable Pinouts
- SRP I/O Module
- CT1 and CE1 I/O Modules
- Installing JUNOSe Software
- Overview
- Identifying the Software Release File
- Installing Software When a Firewall Exists
- Task 1: Obtain the Required Information
- Task 2: Divert Network Traffic to Another Router
- Task 3: Access Privileged Exec Mode
- Task 4: Configure IP on an Interface
- Task 5: Mount the CD on the Network Host
- Task 6: Configure Access to the Network Host
- Task 7: Enable the FTP Server on the E-Series Router
- Task 8: Identify the Files to Transfer
- Task 9: Transfer Files to the User Space
- Task 10: Install Files on the System Space
- Task 11: Save the Current Configuration
- Task 12: Reboot the System
- Installing Software When a Firewall Does Not Exist
- Installing Software in Normal Operational Mode
- Task 1: Obtain the Required Information
- Task 2: Divert Network Traffic to Another Router
- Task 3: Access Privileged Exec Mode
- Task 4: Configure IP on an Interface
- Task 5: Configure Access to the Network Host
- Task 6: Mount the CD on the Network Host
- Task 7: Copy the Software Release File
- Task 8: Save the Current Configuration
- Task 9: Reboot the System
- Installing Software in Boot Mode
- Task 1: Obtain the Required Information
- Task 2: Divert Network Traffic to Another System
- Task 3: Access the Boot Mode
- Task 4: Assign an IP Address
- Task 5: Configure Access to the Network Host
- Task 6: Mount the CD on the Network Host
- Task 7: Copy the Software Release File
- Task 8: Reboot the System
- Copying Release Files from One E-Series Router to Another
- Upgrading Systems That Are Operating with Two SRP Modules
- Customer Support
- Contact Information
- Information You Need to Supply
- Returning Products for Repair or Replacement
- Declaration of Conformity
- Index