[Contents] [Prev] [Next] [Index] [Report an Error]


Cabling I/O Modules

The following section illustrates the common connector types used with E-series I/O modules. For information about the connectors on the different line modules, see Chapter 12, Module Specifications.

BNC Connectors

.


Figure 6-7 I/O module with BNCs

HSSI Connectors

The HSSI I/O module uses a standard 50-pin HSSI connector.



Caution: Do not terminate HSSI connections with SCSI connectors. Although SCSI connectors look very similar to HSSI connectors, using SCSI connectors on HSSI connections may lead to data loss.


Figure 6-8 HSSI I/O module with 50-pin HSSI connector

RJ-45 Connectors

When inserting an RJ-45 connector, be sure it clicks into the port.


Figure 6-9 I/O module with RJ-45 connector

RJ-48C Connectors

When inserting an RJ-48C connector, be sure it clicks into the port.


Figure 6-10 I/O module with RJ-48C connectors

LC Duplex Connectors

In accordance with EN60825-1, Safety of Laser Products - Part 1: Equipment Class, Requirements, and User's Guide (2001), multimode I/O modules with LC connectors are defined as follows:

CLASS 1 LED PRODUCT.

In accordance with EN60825-1, Safety of Laser Products - Part 1: Equipment Class, Requirements, and User's Guide (2001), single-mode I/O modules with LC connectors are defined as follows:

CLASS 1 LASER PRODUCT.



Warning: Do not look directly into LC-style fiber connectors. The fiber-optic laser used in single-mode fiber (SMF) meets the regulatory requirements for casual exposure to the eye; however, looking directly into a laser can cause eye damage.



Warning: IEC 825, Class 1 laser fiber connectors are for connection only to Class 1 laser devices.


Figure 6-11 I/O module with LC full duplex connectors

SC Duplex Connectors

In accordance with EN60825-1, Safety of Laser Products - Part 1: Equipment Class, Requirements, and User's Guide (2001), multimode I/O modules with SC connectors are defined as follows:

CLASS 1 LED PRODUCT.

In accordance with EN60825-1, Safety of Laser Products - Part 1: Equipment Class, Requirements, and User's Guide (2001), single-mode I/O modules with SC connectors are defined as follows:

CLASS 1 LASER PRODUCT.



Warning: Do not look directly into SC-style fiber connectors. The fiber-optic laser used in single-mode fiber (SMF) meets the regulatory requirements for casual exposure to the eye; however, looking directly into a laser can cause eye damage.



Warning: IEC 825, Class 1 laser fiber connectors are for connection only to Class 1 laser devices.

SC duplex connectors have the same basic shape as LC duplex connectors, but are slightly larger. See Figure 6-11.

SMB Connectors

To cable I/O modules with SMB connectors, pull back the metal sheath on the connector, insert the connector into the selected port, and release the metal sheath.


Figure 6-12 I/O module with SMB connectors

Cabling X.21/V.35 Connectors

Four cables are available for the X.21/V.35 I/O modules:

Each 200-pin proprietary socket on the I/O module provides connections to 8 V.35 or X.21 ports. The remote end of the cable is terminated with either 8 X.21 connectors or 8 V.35 connectors. The cable you attach to the port on the I/O module determines whether the connection is X.21 or V.35 and DCE or DTE.


Figure 6-13 X.21/V.35 module with 50-pin X.21/V.35 connector

Redundant Ports

Some modules have redundant ports. See Chapter 12, Module Specifications for specifications. Cabling both ports provides a redundant path to the E-series module.



Caution: For port redundancy to operate correctly on a GE I/O module that supports SFPs, both the primary and redundant ports on an E-series GE I/O module must use the same type of SFP.


[Contents] [Prev] [Next] [Index] [Report an Error]