[Contents] [Prev] [Next] [Index] [Report an Error]


ERX Edge Routers

Installation and User Guide

Release 5.0.x

Part No. 162-00616-00 Rev A00

Juniper Networks is registered in the U.S. Patent and Trademark Office and in other countries as a trademark of Juniper Networks, Inc. Broadband Cable Processor, ERX, ESP, G1, G10, G-series, Internet Processor, JUNOS, JUNOScript, M5, M10, M20, M40, M40e, M160, M-series, NMC-RX, SDX, ServiceGuard, T320, T640, T-series, UMC, and Unison are trademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners. All specifications are subject to change without notice.

Products made or sold by Juniper Networks (including the M5, M10, M20, M40, M40e, M160, and T320 routers, T640 routing node, and the JUNOS software) or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,333,650, 6,359,479, and 6,406,312.

ERX Edge Routers Installation and User Guide, Release 5.0.x

Copyright 2003, Juniper Networks, Inc.

All rights reserved. Printed in USA.

Writers: John Borelli, Helen Shaw, Nathaniel Woodward

Editor: Fran Mues

Revision History

March 2003

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.


[Contents] [Prev] [Next] [Index] [Report an Error]