[Contents] [Prev] [Next] [Index] [Report an Error]


Safety Guidelines

Before and during the installation process, observe the following precautions:



Lightning Activity Warning: Do not work on the system or connect or disconnect cables during lightning activity.



DC Power Disconnection Warning: Before powering on the ERX system, remove power from the DC circuit by deactivating the circuit breaker on the panel board that services the DC circuit.



Jewelry Removal Warning: Remove jewelry (including rings, necklaces, and watches) before working on equipment that is connected to power lines. Metal objects heat up when connected to power and ground and can cause serious burns or become welded to the terminals.



Metal Objects Warning: Do not insert any metal object, such as a screwdriver, into an open slot or the backplane. Doing so may cause electric shock and serious burns.



Repair Warning: Never attempt to repair parts of modules yourself. Only trained customer service personnel are authorized to service parts. Call Juniper Networks Customer Service to make arrangements to return defective modules for repair.


[Contents] [Prev] [Next] [Index] [Report an Error]