[ Contents] [ Prev] [ Next] [ Report an Error]

Cleaning Fiber-Optic Ports

For proper performance of PICs that use fiber-optic cable, you must clean the fiber-optic transceivers before inserting cable.

Because of the high sensitivity of fiber-optic PIC receivers, you must keep the PIC ports clean and free of dust. Small micro-deposits of oil and dust in the canal of the port could cause loss of light, reducing signal power and possibly causing intermittent problems with the optical connection.

Keep the ports clean using an appropriate fiber-cleaning device. Follow the directions for the cleaning kit you use. Some PICs may include fiber-cleaning swabs. See Figure 25 for the proper cleaning procedure.

Figure 25: Cleaning the PIC Ports

Image g002264.gif

After you have cleaned the optical transceiver area of the fiber-optic PIC, make sure that the connector tip of the fiber-optic cable is clean.

To clean the fiber-optic cable connectors, use only an approved alcohol-free fiber-optic cable cleaning kit. Follow the directions for the cleaning kit you use.


[ Contents] [ Prev] [ Next] [ Report an Error]