[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Setting Up Management Access and Logging In

Before you power up the system, you must set up a management console. (See Connecting to a Console Terminal.)

You can monitor and manage the system through either of these methods:

For initial access to the system, you need to physically connect your console directly to the system's RS-232 port. Through this connection you use the SRC command-line interface (CLI) to set the hostname and domain information. You can then access the system remotely (for example, by means of SSH).

To communicate with the system, you must have a terminal emulation program running on your PC or Macintosh. You can use any terminal emulation program, such as HyperTerminal. A UNIX workstation can use the emulator TIP.

To log in to the system:

  1. Start your terminal emulation program using the following settings:
  2. Enter the username.
  3. Enter the password.

    You are now logged in as root user.


[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]