[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Removing and Installing a Hard Drive

Note: If your system is powered on, see the SRC–PE Getting Started User Guide for commands to run before performing these steps.

To remove a hard drive:

  1. Slide the locking tab in the bottom-right corner to the right to release the hard drive.
  2. Hold the tab to the right and slowly pull the unit out.

To install a hard drive, hold the locking tab to the right and slowly slide the unit into the chassis until it clicks into place.


[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]