SUR CETTE PAGE
Exemple : Configuration d’interfaces de tunnel virtuel redondantes dans les MVPN MBGP
Cet exemple montre comment configurer des interfaces de tunnel virtuel (VT) redondantes dans des VPN multicast BGP (MBGP) multicast (MVPN). Pour configurer, incluez plusieurs interfaces VT dans l’instance de routage et, si vous le souhaitez, appliquez l’instruction primary à l’une des interfaces VT.
Exigences
Le périphérique de routage sur lequel des interfaces VT redondantes sont configurées doit exécuter Junos OS version 12.3 ou ultérieure.
Aperçu
Dans cet exemple, l’équipement PE2 a des interfaces VT redondantes configurées dans une instance de routage LDP multicast, et l’une des interfaces VT est affectée comme interface principale.
La figure 1 illustre la topologie utilisée dans cet exemple.
MVPN MBGP
L’exemple suivant illustre la configuration des équipements de périphérie client (CE), de fournisseur (P) et de périphérie fournisseur (PE) de la figure 1. La section Procédure étape par étape décrit les étapes sur l’appareil PE2.
Configuration
Procédure
Configuration rapide de l’interface de ligne de commande
Pour configurer rapidement cet exemple, copiez les commandes suivantes, collez-les dans un fichier texte, supprimez les sauts de ligne, modifiez tous les détails nécessaires pour qu’ils correspondent à votre configuration réseau, puis copiez et collez les commandes dans l’interface de ligne de commande au niveau de la [edit] hiérarchie.
Appareil CE1
set interfaces ge-1/2/0 unit 0 family inet address 10.1.1.1/30 set interfaces ge-1/2/0 unit 0 family mpls set interfaces lo0 unit 0 family inet address 192.0.2.1/24 set protocols ospf area 0.0.0.0 interface lo0.0 passive set protocols ospf area 0.0.0.0 interface ge-1/2/0.0 set protocols pim rp static address 198.51.100.0 set protocols pim interface all set routing-options router-id 192.0.2.1
Dispositif CE2
set interfaces ge-1/2/0 unit 0 family inet address 10.1.1.18/30 set interfaces ge-1/2/0 unit 0 family mpls set interfaces lo0 unit 0 family inet address 192.0.2.6/24 set protocols sap listen 192.168.0.0 set protocols ospf area 0.0.0.0 interface lo0.0 passive set protocols ospf area 0.0.0.0 interface ge-1/2/0.0 set protocols pim rp static address 198.51.100.0 set protocols pim interface all set routing-options router-id 192.0.2.6
Dispositif CE3
set interfaces ge-1/2/0 unit 0 family inet address 10.1.1.22/30 set interfaces ge-1/2/0 unit 0 family mpls set interfaces lo0 unit 0 family inet address 192.0.2.7/24 set protocols ospf area 0.0.0.0 interface lo0.0 passive set protocols ospf area 0.0.0.0 interface ge-1/2/0.0 set protocols pim rp static address 198.51.100.0 set protocols pim interface all set routing-options router-id 192.0.2.7
Appareil P
set interfaces ge-1/2/0 unit 0 family inet address 10.1.1.6/30 set interfaces ge-1/2/0 unit 0 family mpls set interfaces ge-1/2/1 unit 0 family inet address 10.1.1.9/30 set interfaces ge-1/2/1 unit 0 family mpls set interfaces lo0 unit 0 family inet address 192.0.2.3/24 set protocols mpls interface ge-1/2/0.0 set protocols mpls interface ge-1/2/1.0 set protocols ospf area 0.0.0.0 interface lo0.0 passive set protocols ospf area 0.0.0.0 interface ge-1/2/0.0 set protocols ospf area 0.0.0.0 interface ge-1/2/1.0 set protocols ldp interface ge-1/2/0.0 set protocols ldp interface ge-1/2/1.0 set protocols ldp p2mp set routing-options router-id 192.0.2.3
Appareil PE1
set interfaces ge-1/2/0 unit 0 family inet address 10.1.1.2/30 set interfaces ge-1/2/0 unit 0 family mpls set interfaces ge-1/2/1 unit 0 family inet address 10.1.1.5/30 set interfaces ge-1/2/1 unit 0 family mpls set interfaces vt-1/2/0 unit 2 family inet set interfaces lo0 unit 0 family inet address 192.0.2.2/24 set interfaces lo0 unit 1 family inet address 198.51.100.0/24 set protocols mpls interface ge-1/2/1.0 set protocols bgp group ibgp type internal set protocols bgp group ibgp local-address 192.0.2.2 set protocols bgp group ibgp family inet-vpn any set protocols bgp group ibgp family inet-mvpn signaling set protocols bgp group ibgp neighbor 192.0.2.4 set protocols bgp group ibgp neighbor 192.0.2.5 set protocols ospf area 0.0.0.0 interface lo0.0 passive set protocols ospf area 0.0.0.0 interface ge-1/2/1.0 set protocols ldp interface ge-1/2/1.0 set protocols ldp p2mp set policy-options policy-statement parent_vpn_routes from protocol bgp set policy-options policy-statement parent_vpn_routes then accept set routing-instances vpn-1 instance-type vrf set routing-instances vpn-1 interface ge-1/2/0.0 set routing-instances vpn-1 interface vt-1/2/0.2 multicast set routing-instances vpn-1 interface lo0.1 set routing-instances vpn-1 route-distinguisher 100:100 set routing-instances vpn-1 provider-tunnel ldp-p2mp set routing-instances vpn-1 vrf-target target:1:1 set routing-instances vpn-1 protocols ospf export parent_vpn_routes set routing-instances vpn-1 protocols ospf area 0.0.0.0 interface lo0.1 passive set routing-instances vpn-1 protocols ospf area 0.0.0.0 interface ge-1/2/0.0 set routing-instances vpn-1 protocols pim rp static address 198.51.100.0 set routing-instances vpn-1 protocols pim interface ge-1/2/0.0 mode sparse set routing-instances vpn-1 protocols mvpn set routing-options router-id 192.0.2.2 set routing-options autonomous-system 1001
Appareil PE2
set interfaces ge-1/2/0 unit 0 family inet address 10.1.1.10/30 set interfaces ge-1/2/0 unit 0 family mpls set interfaces ge-1/2/2 unit 0 family inet address 10.1.1.13/30 set interfaces ge-1/2/2 unit 0 family mpls set interfaces ge-1/2/1 unit 0 family inet address 10.1.1.17/30 set interfaces ge-1/2/1 unit 0 family mpls set interfaces vt-1/1/0 unit 0 family inet set interfaces vt-1/2/1 unit 0 family inet set interfaces lo0 unit 0 family inet address 192.0.2.4/24 set interfaces lo0 unit 1 family inet address 203.0.113.4/24 set protocols mpls interface ge-1/2/0.0 set protocols mpls interface ge-1/2/2.0 set protocols bgp group ibgp type internal set protocols bgp group ibgp local-address 192.0.2.4 set protocols bgp group ibgp family inet-vpn any set protocols bgp group ibgp family inet-mvpn signaling set protocols bgp group ibgp neighbor 192.0.2.2 set protocols bgp group ibgp neighbor 192.0.2.5 set protocols ospf area 0.0.0.0 interface lo0.0 passive set protocols ospf area 0.0.0.0 interface ge-1/2/0.0 set protocols ospf area 0.0.0.0 interface ge-1/2/2.0 set protocols ldp interface ge-1/2/0.0 set protocols ldp interface ge-1/2/2.0 set protocols ldp p2mp set policy-options policy-statement parent_vpn_routes from protocol bgp set policy-options policy-statement parent_vpn_routes then accept set routing-instances vpn-1 instance-type vrf set routing-instances vpn-1 interface vt-1/1/0.0 multicast set routing-instances vpn-1 interface vt-1/1/0.0 primary set routing-instances vpn-1 interface vt-1/2/1.0 multicast set routing-instances vpn-1 interface ge-1/2/1.0 set routing-instances vpn-1 interface lo0.1 set routing-instances vpn-1 route-distinguisher 100:100 set routing-instances vpn-1 vrf-target target:1:1 set routing-instances vpn-1 protocols ospf export parent_vpn_routes set routing-instances vpn-1 protocols ospf area 0.0.0.0 interface lo0.1 passive set routing-instances vpn-1 protocols ospf area 0.0.0.0 interface ge-1/2/1.0 set routing-instances vpn-1 protocols pim rp static address 198.51.100.0 set routing-instances vpn-1 protocols pim interface ge-1/2/1.0 mode sparse set routing-instances vpn-1 protocols mvpn set routing-options router-id 192.0.2.4 set routing-options autonomous-system 1001
Appareil PE3
set interfaces ge-1/2/0 unit 0 family inet address 10.1.1.14/30 set interfaces ge-1/2/0 unit 0 family mpls set interfaces ge-1/2/1 unit 0 family inet address 10.1.1.21/30 set interfaces ge-1/2/1 unit 0 family mpls set interfaces vt-1/2/0 unit 5 family inet set interfaces lo0 unit 0 family inet address 192.0.2.5/24 set interfaces lo0 unit 1 family inet address 203.0.113.5/24 set protocols mpls interface ge-1/2/0.0 set protocols bgp group ibgp type internal set protocols bgp group ibgp local-address 192.0.2.5 set protocols bgp group ibgp family inet-vpn any set protocols bgp group ibgp family inet-mvpn signaling set protocols bgp group ibgp neighbor 192.0.2.2 set protocols bgp group ibgp neighbor 192.0.2.4 set protocols ospf area 0.0.0.0 interface lo0.0 passive set protocols ospf area 0.0.0.0 interface ge-1/2/0.0 set protocols ldp interface ge-1/2/0.0 set protocols ldp p2mp set policy-options policy-statement parent_vpn_routes from protocol bgp set policy-options policy-statement parent_vpn_routes then accept set routing-instances vpn-1 instance-type vrf set routing-instances vpn-1 interface vt-1/2/0.5 multicast set routing-instances vpn-1 interface ge-1/2/1.0 set routing-instances vpn-1 interface lo0.1 set routing-instances vpn-1 route-distinguisher 100:100 set routing-instances vpn-1 vrf-target target:1:1 set routing-instances vpn-1 protocols ospf export parent_vpn_routes set routing-instances vpn-1 protocols ospf area 0.0.0.0 interface lo0.1 passive set routing-instances vpn-1 protocols ospf area 0.0.0.0 interface ge-1/2/1.0 set routing-instances vpn-1 protocols pim rp static address 198.51.100.0 set routing-instances vpn-1 protocols pim interface ge-1/2/1.0 mode sparse set routing-instances vpn-1 protocols mvpn set routing-options router-id 192.0.2.5 set routing-options autonomous-system 1001
Procédure étape par étape
L’exemple suivant vous oblige à naviguer à différents niveaux dans la hiérarchie de configuration. Pour plus d’informations sur la navigation dans l’interface de ligne de commande, reportez-vous à la section Utilisation de l’éditeur CLI en mode de configuration dans le Guide de l’utilisateur de l’interface de ligne de commande.
Pour configurer des interfaces VT redondantes dans un MVPN MBGP :
Configurez les interfaces physiques et les interfaces de bouclage.
[edit interfaces] user@PE2# set ge-1/2/0 unit 0 family inet address 10.1.1.10/30 user@PE2# set ge-1/2/0 unit 0 family mpls user@PE2# set ge-1/2/2 unit 0 family inet address 10.1.1.13/30 user@PE2# set ge-1/2/2 unit 0 family mpls user@PE2# set ge-1/2/1 unit 0 family inet address 10.1.1.17/30 user@PE2# set ge-1/2/1 unit 0 family mpls user@PE2# set lo0 unit 0 family inet address 192.0.2.4/24 user@PE2# set lo0 unit 1 family inet address 203.0.113.4/24
Configurez les interfaces VT.
Chaque interface VT est configurable sous une seule instance de routage.
[edit interfaces] user@PE2# set vt-1/1/0 unit 0 family inet user@PE2# set vt-1/2/1 unit 0 family inet
Configurez MPLS sur les interfaces physiques.
[edit protocols mpls] user@PE2# set interface ge-1/2/0.0 user@PE2# set interface ge-1/2/2.0
Configurez BGP.
[edit protocols bgp group ibgp] user@PE2# set type internal user@PE2# set local-address 192.0.2.4 user@PE2# set family inet-vpn any user@PE2# set family inet-mvpn signaling user@PE2# set neighbor 192.0.2.2 user@PE2# set neighbor 192.0.2.5
Configurez un protocole de passerelle intérieure.
[edit protocols ospf area 0.0.0.0] user@PE2# set interface lo0.0 passive user@PE2# set interface ge-1/2/0.0 user@PE2# set interface ge-1/2/2.0
Configurez LDP.
[edit protocols ldp] user@PE2# set interface ge-1/2/0.0 user@PE2# set interface ge-1/2/2.0 user@PE2# set p2mp
Configurez la stratégie de routage.
[edit policy-options policy-statement parent_vpn_routes] user@PE2# set from protocol bgp user@PE2# set then accept
Configurez l’instance de routage.
[edit routing-instances vpn-1] user@PE2# set instance-type vrf user@PE2# set interface ge-1/2/1.0 user@PE2# set interface lo0.1 user@PE2# set route-distinguisher 100:100 user@PE2# set vrf-target target:1:1 user@PE2# set protocols ospf export parent_vpn_routes user@PE2# set protocols ospf area 0.0.0.0 interface lo0.1 passive user@PE2# set protocols ospf area 0.0.0.0 interface ge-1/2/1.0 user@PE2# set protocols pim rp static address 198.51.100.0 user@PE2# set protocols pim interface ge-1/2/1.0 mode sparse user@PE2# set protocols mvpn
Configurez les interfaces VT redondantes dans l’instance de routage.
Faites de vt-1/1/0.0 l’interface principale.
[edit routing-instances vpn-1] user@PE2# set interface vt-1/1/0.0 multicast primary user@PE2# set interface vt-1/2/1.0 multicast
Configurez l’ID du routeur et le numéro du système autonome (AS).
[edit routing-options] user@PE2# set router-id 192.0.2.4 user@PE2# set autonomous-system 1001
Résultats
En mode configuration, confirmez votre configuration en entrant les show interfacescommandes , show protocols, show policy-options, show routing-instanceset show routing-options . Si la sortie n’affiche pas la configuration prévue, répétez les instructions de configuration de cet exemple pour la corriger.
user@PE2# show interfaces
ge-1/2/0 {
unit 0 {
family inet {
address 10.1.1.10/30;
}
family mpls;
}
}
ge-1/2/2 {
unit 0 {
family inet {
address 10.1.1.13/30;
}
family mpls;
}
}
ge-1/2/1 {
unit 0 {
family inet {
address 10.1.1.17/30;
}
family mpls;
}
}
vt-1/1/0 {
unit 0 {
family inet;
}
}
vt-1/2/1 {
unit 0 {
family inet;
}
}
lo0 {
unit 0 {
family inet {
address 192.0.2.4/24;
}
}
unit 1 {
family inet {
address 203.0.113.4/24;
}
}
}
user@PE2# show protocols
mpls {
interface ge-1/2/0.0;
interface ge-1/2/2.0;
}
bgp {
group ibgp {
type internal;
local-address 192.0.2.4;
family inet-vpn {
any;
}
family inet-mvpn {
signaling;
}
neighbor 192.0.2.2;
neighbor 192.0.2.5;
}
}
ospf {
area 0.0.0.0 {
interface lo0.0 {
passive;
}
interface ge-1/2/0.0;
interface ge-1/2/2.0;
}
}
ldp {
interface ge-1/2/0.0;
interface ge-1/2/2.0;
p2mp;
}
user@PE2# show policy-options
policy-statement parent_vpn_routes {
from protocol bgp;
then accept;
}
user@PE2# show routing-instances
vpn-1 {
instance-type vrf;
interface vt-1/1/0.0 {
multicast;
primary;
}
interface vt-1/2/1.0 {
multicast;
}
interface ge-1/2/1.0;
interface lo0.1;
route-distinguisher 100:100;
vrf-target target:1:1;
protocols {
ospf {
export parent_vpn_routes;
area 0.0.0.0 {
interface lo0.1 {
passive;
}
interface ge-1/2/1.0;
}
}
pim {
rp {
static {
address 198.51.100.0;
}
}
interface ge-1/2/1.0 {
mode sparse;
}
}
mvpn;
}
}
user@PE2# show routing-options router-id 192.0.2.4; autonomous-system 1001;
Si vous avez terminé de configurer l’appareil, passez commit en mode de configuration.
Vérification
Vérifiez que la configuration fonctionne correctement.
La show multicast route extensive instance instance-name commande affiche également l’interface VT dans la table de transfert multicast lorsque le trafic multicast est transmis via le VPN.
Vérification de l’itinéraire LSP
But
Vérifiez que l’interface LT attendue est affectée à l’itinéraire appris par LDP.
Action
À partir du mode opérationnel, entrez la show route table mpls commande.
user@PE2> show route table mpls mpls.0: 13 destinations, 13 routes (13 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 0 *[MPLS/0] 02:09:36, metric 1 Receive 1 *[MPLS/0] 02:09:36, metric 1 Receive 2 *[MPLS/0] 02:09:36, metric 1 Receive 13 *[MPLS/0] 02:09:36, metric 1 Receive 299776 *[LDP/9] 02:09:14, metric 1 > via ge-1/2/0.0, Pop 299776(S=0) *[LDP/9] 02:09:14, metric 1 > via ge-1/2/0.0, Pop 299792 *[LDP/9] 02:09:09, metric 1 > via ge-1/2/2.0, Pop 299792(S=0) *[LDP/9] 02:09:09, metric 1 > via ge-1/2/2.0, Pop 299808 *[LDP/9] 02:09:04, metric 1 > via ge-1/2/0.0, Swap 299808 299824 *[VPN/170] 02:08:56 > via ge-1/2/1.0, Pop 299840 *[VPN/170] 02:08:56 > via ge-1/2/1.0, Pop 299856 *[VPN/170] 02:08:56 receive table vpn-1.inet.0, Pop 299872 *[LDP/9] 02:08:54, metric 1 > via vt-1/1/0.0, Pop via ge-1/2/2.0, Swap 299872En mode configuration, modifiez l’interface VT principale en supprimant l’instruction
primaryde l’interface vt-1/1/0.0 et en l’ajoutant à l’interface vt-1/2/1.0.[edit routing-instances vpn-1] user@PE2# delete interface vt-1/1/0.0 primary user@PE2# set interface vt-1/2/1.0 primary user@PE2# commit
À partir du mode opérationnel, entrez la show route table mpls commande.
user@PE2> show route table mpls mpls.0: 13 destinations, 13 routes (13 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 0 *[MPLS/0] 02:09:36, metric 1 Receive 1 *[MPLS/0] 02:09:36, metric 1 Receive 2 *[MPLS/0] 02:09:36, metric 1 Receive 13 *[MPLS/0] 02:09:36, metric 1 Receive 299776 *[LDP/9] 02:09:14, metric 1 > via ge-1/2/0.0, Pop 299776(S=0) *[LDP/9] 02:09:14, metric 1 > via ge-1/2/0.0, Pop 299792 *[LDP/9] 02:09:09, metric 1 > via ge-1/2/2.0, Pop 299792(S=0) *[LDP/9] 02:09:09, metric 1 > via ge-1/2/2.0, Pop 299808 *[LDP/9] 02:09:04, metric 1 > via ge-1/2/0.0, Swap 299808 299824 *[VPN/170] 02:08:56 > via ge-1/2/1.0, Pop 299840 *[VPN/170] 02:08:56 > via ge-1/2/1.0, Pop 299856 *[VPN/170] 02:08:56 receive table vpn-1.inet.0, Pop 299872 *[LDP/9] 02:08:54, metric 1 > via vt-1/2/1.0, Pop via ge-1/2/2.0, Swap 299872
Signification
Avec la configuration d’origine, la sortie montre l’interface vt-1/1/0.0. Si vous remplacez l’interface principale par vt-1/2/1.0, la sortie affiche l’interface vt-1/2/1.0.