Configuration du mappage des adresses et des ports avec l’encapsulation (MAP-E)
Cet exemple vous montre comment configurer la solution de relais de bordure MAP-E (BR) à l’aide d’un nouveau style de configuration basé sur des sauts.
Pour configurer MAP-E :
Par exemple :
chassis {
fpc 4 {
pic 0 {
inline-services {
bandwidth 100g;
}
}
}
fpc 5 {
pic 0 {
inline-services {
bandwidth 100g;
}
}
}
}
services {
service-set sset1 {
softwire-rules sw-rule1;
next-hop-service {
inside-service-interface si-4/0/0.1;
outside-service-interface si-4/0/0.2;
}
}
service-set sset2 {
softwire-rules sw-rule1;
next-hop-service {
inside-service-interface si-5/0/0.1;
outside-service-interface si-5/0/0.2;
}
}
softwire {
softwire-concentrator {
map-e mape-domain-1 {
softwire-address 2001:db8:ffff::1;
ipv4-prefix 192.0.2.0/24;
mape-prefix 2001:db8:1234:ab00::/56;
ea-bits-len 16;
psid-offset 4;
psid-length 8;
mtu-v6 9192;
version-03;
}
}
rule sw-rule1 {
match-direction input;
term t1 {
then {
map-e mape-domain-1;
}
}
}
}
}
interfaces {
xe-0/1/1 {
unit 0 {
family inet6 {
address 2001:db8::1/32 {
ndp 2001:db8:6434:0:00c0:0002:6400:3400 mac 00:11:22:33:44:55;
}
}
}
}
xe-0/1/2 {
unit 0 {
family inet {
address 100.1.1.1/24 {
arp 100.1.1.2 mac 00:11:22:33:44:55;
}
}
}
}
si-4/0/0 {
unit 1 {
family inet;
family inet6;
service-domain inside;
}
unit 2 {
family inet;
family inet6;
service-domain outside;
}
}
si-5/0/0 {
unit 1 {
family inet6;
service-domain inside;
}
unit 2 {
family inet;
family inet6;
service-domain outside;
}
}
}