show lldp
Syntaxe
show lldp <detail>
Description
Affichez des informations sur le protocole LLDP (Link Layer Discovery Protocol).
Options
detail | (Facultatif) Affichez le niveau de sortie détaillé. |
Niveau de privilège requis
Vue
Champs de sortie
Le tableau 1 décrit les champs de sortie de la show lldp
commande. Les champs de sortie sont répertoriés dans l’ordre approximatif dans lequel ils apparaissent.
Nom du champ |
Description du champ |
---|---|
LLDP |
État du LLDP : activé ou désactivé. |
Intervalle de publication |
Valeur du paramètre d’intervalle de publication. |
Délai de transmission |
Valeur du paramètre de délai de transmission. |
Minuterie de maintien |
Valeur du paramètre hold timer. |
Intervalle de notification |
Valeur du paramètre intervalle de notification. |
Intervalle d’interruption de configuration |
Valeur du paramètre d’interruption de configuration. |
Minuterie de maintien de la connexion |
Valeur du paramètre de minuterie de maintien de connexion. |
|
|
Description du port Type TLV |
Valeur suivante utilisée pour la description de port TLV :
|
Interface |
Nom de l’interface pour laquelle les informations de configuration LLDP sont rapportées Pour plus d’informations sur les noms d’interface, consultez Vue d’ensemble de l’attribution de noms d’interface. Pour plus d’informations sur les noms d’interface des routeurs TX Matrix, consultez TX Matrix Router Chassis and Interface Names. Pour plus d’informations sur la numérotation FPC sur les routeurs TX Matrix, consultez Matrice de routage avec un routeur TX Matrix Numérotation FPC. |
|
Nom de l’interface Ethernet agrégée, le cas échéant, à laquelle l’interface appartient. |
|
État d’exploitation LLDP. L’état peut être Activé ou Désactivé. |
|
État d’exploitation LLDP-MED. L’état peut être Activé ou Désactivé. |
|
État opérationnel de négociation de puissance LLDP. L’état peut être Activé ou Désactivé. |
Prise en charge des TLV de base LLDP |
Liste des TLV LLDP de base pris en charge par cet appareil (détail uniquement). |
LLDP 802 TLV pris en charge |
Liste des TLV IEEE 802.1 LLDP prises en charge par cet appareil (détail uniquement). |
Exemple de sortie
Afficher LLDP
user@host> show lldp LLDP : Enabled Advertisement interval : 30 seconds Transmit delay : 2 seconds Hold timer : 120 seconds Notification interval : 0 Second(s) Config Trap Interval : 0 seconds Connection Hold timer : 300 seconds Port ID TLV subtype : locally-assigned Port Description TLV type : interface-description (ifDescr) Interface Parent Interface LLDP LLDP-MED Power Negotiation all - Enabled
Exemple de sortie
Afficher les détails LLDP
user@host> show lldp detail LLDP : Enabled Advertisement interval : 30 seconds Transmit delay : 2 seconds Hold timer : 120 seconds Notification interval : 0 Second(s) Config Trap Interval : 0 seconds Connection Hold timer : 300 seconds Port ID TLV subtype : locally-assigned Port Description TLV type : interface-description (ifDescr) Interface Parent Interface LLDP LLDP-MED Power Negotiation Neighbor count all - Enabled 2 Interface Parent Interface Vlan-id Vlan-name xe-0/0/0 - 4080 vlan-4080 xe-0/0/1 - 4080 vlan-4080 Basic Management TLVs supported: End Of LLDPDU, Chassis ID, Port ID, Time To Live, Port Description, System Name, System Description, System Capabilities, Management Address Organizationally Specific TLVs supported: Port VLAN tag, VLAN Name, MAC/PHY Configuration/Status, Link Aggregation,Maximum Frame Size
Informations sur la version
Commande introduite dans Junos OS version 9.6.