Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Chassis Cluster Fabric Ports

    After the chassis cluster is formed, you must configure the interfaces that make up the fabric (data) ports.

    Ensure that you have configured the following:

    • Set the chassis cluster IDs on both vSRX instances and rebooted the vSRX instances.
    • Configured the control and fabric links.
    1. On the vSRX node 0 console in configuration mode, configure the fabric (data) ports of the cluster that are used to pass real-time objects (RTOs). The configuration will be synchronized directly through the control port to vSRX node 1.

      Note: A fabric port can be any unused revenue interface.

      user@vsrx0# set interfaces fab0 fabric-options member-interfaces ge-0/0/0
      user@vsrx0# set interfaces fab1 fabric-options member-interfaces ge-7/0/0
      user@vsrx0# set chassis cluster reth-count 2
      user@vsrx0# set chassis cluster redundancy-group 0 node 0 priority 100
      user@vsrx0# set chassis cluster redundancy-group 0 node 1 priority 10
      user@vsrx0# set chassis cluster redundancy-group 1 node 0 priority 100
      user@vsrx0# set chassis cluster redundancy-group 1 node 1 priority 10
      user@vsrx0# commit
    2. Reboot vSRX node 0.

    Modified: 2017-09-13