Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    vSRX Default Settings on AWS

    vSRX requires the following basic configuration settings:

    • Interfaces must be assigned IP addresses.
    • Interfaces must be bound to zones.
    • Policies must be configured between zones to permit or deny traffic.

    Table 1 lists the factory-default settings for security policies on the vSRX.

    Table 1: Factory-Default Settings for Security Policies

    Source Zone

    Destination Zone

    Policy Action

    trust

    untrust

    permit

    trust

    trust

    permit

    Caution: Do not use the load factory-default command on a vSRX AWS instance. The factory-default configuration removes the AWS preconfiguration. If you must revert to factory default, ensure that you manually reconfigure AWS preconfiguration statements before you commit the configuration; otherwise, you will lose access to the vSRX instance. See Configuring vSRX Using the CLI for AWS preconfiguration details.

    Modified: 2018-01-31