Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Known Issues


This section lists the known issues in this release.

  • vMX traffic is not restored until 140 seconds after the VFP installs the routes. PR1011480

  • vMX stops sending ICMPv6 echo-reply messages when receiving 100 Kpps ICMPv6 echo-request messages. PR1053964

  • LACP packets are getting dropped on the bridge. PR1059231

  • Installing vMX after a server reboot fails the first time because of a HugePage error (for virtio). PR1060438

  • LLDP packets are getting dropped on the bridge (for virtio). PR1066850

  • After an FPC restart, /kernel, chassisd, and i386_junos error messages appear in the syslog file. PR1070585

  • When the FPC is restarting, COS(cos_chassis_scheduler_pre_add_action:2137) error messages appear indicating that flexible queuing mode is not enabled. PR1070655

  • Output for the show pfe statistics traffic command might take a few seconds to appear and many MIB2D_COUNTER_DECREASING: pfes_stats_delta: counter messages appear in the log file before the response time improves. PR1071659

  • When the FPC is restarting, a Received unsupported pic_mask 0x1 ignored message message appears in the syslog file. PR1072436

  • Traffic loss occurs at a remote receiver because of lost remote PIM joins to the local receiver. PR1087031

  • Using ssh to connect to the VFP might have a noticeable delay. PR1089935